* HSK 40A, 40C, 40E and KM40 tapers * HSK 40A, 40C, 40E and KM40 tapers * HSK 40A, 40C, 40E and KM40 tapers SUPER CHEST 34”W X 19.1/8”D X 23.1/8”H 2” H Drawers SUPER CABINET 34”W X 19.1/8”D X 35”H Each drawer measures 29”W X 18”D X 2”H SUPER CHEST AND SUPER CABINET FOR MAXIMUM TOOL STORAGE TALL TREE LOCKERS WALL LOCKERS WALL MOUNT TREE FOR: CAT, BT, HSK, CAPTO & NMTB HOLDERS FOR: CAT, BT, HSK, CAPTO & NMTB HOLDERS ● Solid welded drawer dividers front to back provide a rigid smooth surface with no holes to lose parts. ● 24,000 combined cubic inches of usable storage space. ● Heavy duty cam lock and hidden locking mechanism. SILVER & DEMING DRILL DISPENSERS Dimensions: 14.5/8”W x 7.3/8”D x 7.3/4”H TAPER SHANK/ TAPER LENGTH DRILL DISPENSER Dimensions: 26”W x 12”D x 12.1/2”H Weight: 46 lbs. TAP AND DRILL DISPENSER Dimension: 14.5/8” W x 7.3/8” D x 7.3/4” H Weight: 10.1/2 lbs ● Holds one dozen (minimum) of each size. ● Rugged, exclusive I-beam double wall construction ● 18 gauge, all steel construction with Huot’s Ecolo-Clad plastic paint. Environmentally safe finish ● Steel skid keeps unit off floor and allows for stacking for even greater space savings. ● Stackable. Two high maximum. ● Label holders provide identification at a glance. ● Each drawer rigidly constructed of solid steel with no holes in drawer bottom to keep small parts inside of drawer. Will hold 150 lbs. supported on full extension ball bearings slides. ● Deeper drawers available. ● Lockers store tools and protect them from dust, debris and theft ● Unit stands over 6' tall and comes with 5 toolholder shelves ● Uses the Tree family of shelves for toolholders and collets ● Doors have full length hat channels for strength and stability ● Throw bar and lock keeps door closed tight ● Finished in baked on powder coat for lasting durability ● Same features as the Tall Locker but only 46½” high ● Designed to mount on a wall or can be used on a bench top ● Base mounts directly to wall in tool crib, cell, or anywhere toolholders are needed ● Uses the Tree family of shelves ● Open design allows easy identification and access to tools ● Shelves can be mixed and matched for toolholders and collets SILVER & DEMING DISPENSER Model/EDP # 13165 Cabinet holds the following Silver & Deming drills, 33/64ths to 1” by 64ths as well as 1.1/32”, 1.1/16”, 1.1/8”, 1.3/16”, 1.1/4”, 1.3/8”, 1.1/2”. The lockable dispenser contains a total of 110 compartments, 103 identified for each size Silver and Deming drill, and an additional 7 compartments for specialized requirements. FRACTIONAL & METRIC DRILL DISPENSER Model/EDP #13190 Cabinet holds fractional drills 1/16” to 1/2” by 64ths, 1 to 60 wire gage, A to Z letter sizes and metric from 0.35mm to 13.00mm including 0.35mm to 2.50mm x .05mm, 2.6mm to 10.0mm x .1mm and 10.2, 10.5, 10.8, 11.0, 11.2, 11.5, 11.8, 12.0, 12.2, 12.5, 13.0mm. Will hold a minimum of full packages of each size. All models are 6 drawer cabinets measuring 26”W by 12”D by 15.13/16”H and ship at 75lbs. Will ship UPS. Drawers measure 23.1/8”W x 11”D x 2”H. DRILLS, END-MILLS & REAMERS DISPENSER Model/EDP #13700 Metric 4 in 1 Combination dispenser Drills - Metric .35mm to 2.5mm x .05mm, 2.6mm to 10mm x .1 and additional common sizes up to 13mm. End Mills - Metric 2.0 to 7.0 x .5 and 8.0, 9.0, 10.0, 11.0, 12.0, 12.5, 13.0mm and 31 of most commonly used taps from 2.5mm x .45 to 30mm x 3.50 mm Reamers - Metric 1.0mm to 13.0mm x .5 34.25" W x 16.125" D x 74" H, 210 lbs CAPACITY: 50 OR 90 HOLDERS 31.25" W x 15.75" D x 46.5" H, 110 lbs CAPACITY: 30 OR 54 HOLDERS CAPACITY: 30 OR 54 HOLDERS 28.5" W x 36" H x 14" D, 55 lbs. DESCRIPTION WT. LBS. PART # 1-030- Super chest with 8 drawer capacity. 256 individual drawer dividers provided. 220 530 Super cabinet with 15 drawer capacity. 480 individual drawer dividers provided. All drawers are 2” H. 375 525 Super cabinet with 8 drawers: (1) 2”H drawer and (7) 4” H drawers. 390 527 FOR SIZES PART # 1-030- 2ea. 33/64” - 1” 13166 2ea. 1” - 1.1/2” 13167 FOR SIZES PART # 1-030- 1/8” to 1” x 64th 57 PART # 1-030-1414 TAP DRILL 6-32 #36 8-32 #29 10-24 #25 10-32 #21 1/4-20 #7 1/4-28 #3 5/16-18 F TAP DRILL 5/16-24 I 3/8-16 5/16 3/8-24 Q 7/16-14 U 7/16-20 25/64 1/2-13 27/64 1/2-20 29/64 MODEL PART # 1-030- 13165 13165 13190 13190 13700 13700 SIX DRAWER MASTER DISPENSERS - 1948 - Bass Tool & Supply, Inc. Houston Email Fax Toll Free www.basstool.com (713) 682-1889 [email protected] (713) 681-4931 800-442-0042 PART # 1-030- FOR TAPER CAPACITY 55631 BT, CAT, NMTB 30 90 55641 BT, CAT, NMTB 40 90 55651 BT, CAT, NMTB 50 50 55664 HSK 40* 90 55671 HSK 63A 90 55681 HSK 100A 50 55684 CAPTO® C4 90 55685 CAPTO® C5 90 55686 CAPTO® C6 90 PART # 1-030- FOR TAPER CAPACITY 55731 BT, CAT, NMTB 30 54 55741 BT, CAT, NMTB 40 54 55751 BT, CAT, NMTB 50 30 55764 HSK 40* 54 55771 HSK 63A 54 55781 HSK 100A 30 55784 CAPTO® C4 54 55785 CAPTO® C5 54 55786 CAPTO® C6 54 PART # 1-030- FOR TAPER CAPACITY 55730 BT, CAT, NMTB 30 54 55740 BT, CAT, NMTB 40 54 55750 BT, CAT, NMTB 50 30 55763 HSK 40* 54 55770 HSK 63A 54 55780 HSK 100A 30 55790 CAPTO® C4 54 55791 CAPTO® C5 54 55792 CAPTO® C6 54 55797 CAPTO® C8 30
