WATER SOLUBLE COOLANTS STRAIGHT CUTTING OILS MET-CUT ECONOMICAL STRAIGHT CUTTING OILS SYNTHETIC TUBE FORMING FLUID COOLANT GENERAL DESCRIPTION APPLICATION & CHARACTERISTICS PART NUMBERS SIZE PART # Q-SOL 265C Q-SOL 265C is a broad purpose soluble oil for cutting and grinding all metals. This product is designed as an improvement to traditional soluble oils, with improved odor control, fluid life, and rust protection. Additionally, the very stable emulsion means Q-SOL 265C pays for itself by reducing usage rates, which delivers cost savings and reduced waste haul-off. The fluid is well suited for job shop operations, providing high performance on hard ferrous and nickel alloys, as well as soft and gummy aluminum alloys Appearance of concentrate: Thick amber liquid Appearance of emulsion: Milky Density: 8.02 lbs/gal pH of emulsion @ 5%: 8.8 - 9.2 Diethanolamine, Mercury, Nitrite, Phosphates, Silicone, Sulfur, Chlorine: None RECOMMENDED DILUTIONS: Grinding:3-5% Machining: 4-12% 5 GAL QC-QS265C-5 55 GAL. QC-QS265C-55 310 GAL. TOTE QC-QS265C-310 Q-SOL 285 SOLUBLE OIL Q-SOL 285 is a unique, general-purpose, water-soluble coolant concentrate. This is a multi-purpose fluid for use in machining and grinding of ferrous and non-ferrous metals. The product is designed for use on a wide range of metals, which makes it well suited for job shop operations. Q-SOL 285 is non-staining to most aluminum alloys (including 6061-T6) and yellow metals and exhibits outstanding corrosion control on ferrous metals. ● Very cost effective ● Operator friendly - this fluid is very mild to the skin and provides good odor control ● Improved rust protection versus conventional soluble oils ● Long fluid life in both central systems and individual sumps ● Extended tool life ● Low foaming ● Clean machine surfaces and parts with a soft, non-tacky film residue Appearance of concentrate: Clear, amber liquid Appearance of emulsion: Semi-translucent Density: 7.85 lbs/gal pH of emulsion @ 5%: 8.9-9.3 Chlorine, Diethanolamine, Mercurials, Nitrite, Phosphates, Silicones, Sulfur: None RECOMMENDED DILUTIONS: Grinding:3-5% Machining: 4-12% 5 GAL. QC-QS285-5 55 GAL. QC-QS285-55 310 GAL. TOTE QC-QS285-310 Q-SOL 286 Q-SOL 286 is a unique, general purpose, water-soluble coolant concentrate with EP. This is a multi-purpose fluid for use in machining and grinding of ferrous and non-ferrous metals. The product is designed for use on a wide range of metals, which makes it well suited for job shop operations. Q-SOL 286 is non-staining to most aluminum alloys (including 6061-T6) and yellow metals and exhibits outstanding corrosion control on ferrous metals. ● Operator friendly - this fluid is mild to the skin and provides good odor control ● Improved rust protection versus conventional soluble oils ● Long fluid life in both central systems and individual sumps ● Extended tool life ● Low foaming ● Clean machine surfaces and parts with a soft, non-tacky film residue Appearance of concentrate: Clear, amber viscous liquid Appearance of emulsion: Semi-translucent Density: 8.02 lbs/gal pH of 5% emulsion: 8.8-9.2 Chlorine: Yes, Very Long Chain Does not contain Boric Acid, Diethanolamine, Heavy Metals, Formaldehyde, Phosphates, Nitrite, Silicones or Sufurized Additives RECOMMENDED DILUTIONS: Grinding:3-5% Machining: 4-12% 5 GAL. QC-QS286-5 55 GAL. QC-QS286-55 310 GAL. TOTE QC-QS286-310 XTREME MAG 440 SOLUBLE OIL ● High performance magnesium machining fluid. ● XTREME-MAG 440 is a revolutionary new cutting fluid for the machining of wrought and cast magnesium alloys as well as high magnesium content aluminum alloys such as MIC-6. This fluid was specifically formulated to solve the issues of instability, short fluid life, and separation associated with machining magnesium. ● Appearance: Milky All machining operations on MAGNESIUM Also suitable for: Aluminum, bronze, brass & copper 5 GAL. QC-XM440-5 55 GAL. QC-XM440-55 310 GAL. TOTE QC-XM440-310 COOLANT GENERAL DESCRIPTION APPLICATION & CHARACTERISTICS PART NUMBERS SIZE PART # Q-TUBE 320 Q-TUBE 320 is an oil rejecting synthetic specifically developed for tube mills. It provides exceptional detergency to prevent smut buildup on rollers and surface demarcations on finished tubes. Q-TUBE 320 reduces the need to manually clean rollers and finished tubes. This is an oil-rejecting fluid that provides excellent in-process corrosion protection for parts and machine tools. ● Eliminates oily, graphitic smut to produce exceptionally clean stock ● Long system/sump life ● Stable product suitable for use in wide range of water conditions ● Low foaming in both hard and soft water ● Complete rejection of tramp oil Appearance of concentrate: Colorless to light yellow liquid Appearance of dilution: Transparent DEA, Formaldehyde Release Biocides, Mercurials, Nitrites, Phenols, Phosphates, Silicones, Sulfur ........None RECOMMENDED DILUTIONS: Tube Forming: 3-6% 5 GAL. QC-QTUBE320-5 55 GAL. QC-QTUBE320-55 310 GAL. TOTE QC-QTUBE320-310 DESIGNATION GENERAL DESCRIPTION PRIMARY APPLICATIONS PRIMARY MATERIALS PART NUMBERS SIZE PART # MET-CUT 773 VISCOSITY: 215 CLEAR, AMBER LIQUID MET-CUT 773 is a highly fortified cutting and grinding oil designed for difficult applications on steel and stainless steel work pieces. MET-CUT 773 utilizes a combination of sulfurized anti-weld additives, chlorinated extreme pressure additives and unique boundary lubricity components, compounded to a medium viscosity for a wide variety of cutting and grinding applications. MET-CUT 773 is suitable for use on both ferrous and non- ferrous alloys including yellow metals. Gear hobbing Gear cutting Gear shaping Gear shaving Roll forming Tapping Threading Steels High Alloy Steel Nickel Titanium Aluminum 5 GAL. QC-MC773-5 55 GAL. QC-MC773-55 310 GAL. TOTE QC-MC773-310 MET-CUT 734 VISCOSITY: 120 CLEAR, LIGHT YELLOW MET-CUT 734 is a low cost straight oil designed for both cutting and grinding applications. This straight oil is formulated with very good polar lubrication and does not utilize chlorinated extreme pressure additives. MET-CUT 734 is designed to prevent chip welding and metal pick-up on the tool and grinding wheel. This fluid is used where fine finishes and critical grind performance is required. CNC Swiss style turning Tapping, Threading CNC machining High speed turning Grinding and honing 5 GAL. QC-MC734-5 55 GAL. QC-MC734-55 310 GAL. TOTE QC-MC734-310 MET-CUT 754 VISCOSITY: 120 REDDISH AMBER MET-CUT 754 is chlorine free heavy duty highly formulated cutting and forming oil for the aerospace, electronic and medical component industries. unique new EP technology is employed in this product that matchesthe performance of chlorinated additives without the chlorine. This oil is specially designed for Swiss style screw machine applications. The light viscosity and high extream pressure compounding provides goood lubrication for severe cutting and form grinding applications. MET-CUT 754 is safe on all metals especially stainless steels, difficult-to-machine high alloy steels, nickel, titanium, specialty high strength alloys and aerospace aluminums. It is also suitable for machining mild steels and copper alloys. High Speed Machining Deep Hole Drilling Drilling Tapping Gun Drilling Turning Threading Form Grinding 5 GAL. QC-MC754-5 55 GAL. QC-MC754-55 310 GAL. TOTE QC-MC754-310 MET-CUT 755HD VISCOSITY: 140 CLEAR, RED LIQUID MET-CUT 755HD is a highly formulated, heavy duty cutting and forming oil for the aerospace, electronic and medical component industries. This oil is specially designed for Swiss style screw machine applications. The light viscosity and high extreme pressure compounding provides good lubrication for severe cutting and form grinding applications. MET-CUT 755HD is safe on all metals especially stainless steels, difficult-to-machine high alloy steels, nickel, specialty high strength alloys and aerospace aluminums. It is also suitable for machining mild steels and copper alloys. High speed machining Deep hole drilling Drilling, Gundrilling Tapping, Thread milling Turning Form grinding 5 GAL. QC-MC755HD-5 55 GAL. QC-MC755HD-55 310 GAL. TOTE QC-MC755HD-310 - 1863 - Toll Free Fax Email Houston Bass Tool & Supply, Inc. 800-442-0042 (713) 681-4931 [email protected] (713) 682-1889 www.basstool.com
