SUPER CHEST 34”W X 19.1/8”D X 23.1/8”H 2” H Drawers SUPER CABINET 34”W X 19.1/8”D X 35”H Each drawer measures 29”W X 18”D X 2”H Super Chest and Super Cabinet for Maximum Tool Storage ● Solid welded drawer dividers front to back provide a rigid smooth surface with no holes to lose parts. ● 24,000 combined cubic inches of usable storage space. ● Heavy duty cam lock and hidden locking mechanism. Dispenser - Tool Storage & Management “The Original “ Drill Dispensers Dimensions: 14.5/8”W x 7.3/8”D x 7.3/4”H Dispensers #1, #2, & #3 are shown stacked on top of each other ● Cost effective tool management and storage ● Safest way to store sharp tools ● Fast inventory tracking ● Eliminates wasted searching ● Helps prevent lost or damaged tools ● See tool inventory at a glance ● 100% U.S.A. made! All Drill Dispensers (Original and Stub/screw) feature: ● Holds full packages of each size (12pc min.). ● Stackable for larger inventories. ● One piece drawer slide for long useful life. ● Decimal equivalents. Stub Drills Dispensers Silver & Deming Drill Dispensers Dimensions: 14.5/8”W x 7.3/8”D x 7.3/4”H Taper Shank/ Taper Length Drill Dispenser Dimensions: 26”W x 12”D x 12.1/2”H Weight: 46 lbs. Tap and Drill Dispenser Dimension: 14.5/8” W x 7.3/8” D x 7.3/4” H Weight: 10.1/2 lbs ● Holds one dozen (minimum) of each size. ● Rugged, exclusive I-beam double wall construction ● 18 gauge, all steel construction with Huot’s Ecolo-Clad plastic paint. Environmentally safe finish ● Steel skid keeps unit off floor and allows for stacking for even greater space savings. ● Stackable. Two high maximum. ● Label holders provide identification at a glance. ● Each drawer rigidly constructed of solid steel with no holes in drawer bottom to keep small parts inside of drawer. Will hold 150 lbs. supported on full extension ball bearings slides. ● Deeper drawers available. Master Drill Dispensers Dimensions: 26”W x 12”D x 12.1/2”H Weight: 43lbs. ● All steel cabinet with vinyl dividers to help protect and separate bits. ● Each cabinet is lockable with its own set of 2 keys. ● Each drawer measures 23.1/8” wide; 11” front to back. ● Stackable for larger inventories at one location. ● Lower drawer is undivided for extra long drills, reamers, and miscellaneous tools. ● Drawer Divider Kit available for lower drawer. Both Model Master Drill Dispensers (U.S. And Metric Sizes) Feature: Model 13175 EDP# 13175 U.S.Sizes Holds full packages (minimum of 12 pieces) of jobber or screw machine length drills, fractional, letter and wire gauge sizes in one complete cabinet. ● Top drawer holds fractional drills 1/16” to 1/2” by 64th with 42 compartments. ● 2nd drawer is for #1 to #60 wire gauge with 75 compartments. ● 3rd drawer for letter size A to Z with 42 compartments. Model 13180 EDP# 13180 Metric Sizes Holds metric drills from .35mm to 13.00mm. Sizes include: .35mm to 2.50mm by 0.5mm, 2.6mm to 10.0mm by .1mm, 10.2mm, 10.5mm, 10.8mm, 11.0mm, 11.2mm, 11.5mm, 11.8mm, 12.0mm, 12.2mm, 12.5mm, and 13.0mm. 138 compartments to store and inventory all your metric drill bits. Same great features as our #13175 jobbers length master cabinet. SIX DRAWER MASTER DISPENSERS Silver & Deming Dispenser Model/EDP # 13165 Cabinet holds the following Silver & Deming drills, 33/64ths to 1” by 64ths as well as 1.1/32”, 1.1/16”, 1.1/8”, 1.3/16”, 1.1/4”, 1.3/8”, 1.1/2”. The lockable dispenser contains a total of 110 compartments, 103 identified for each size Silver and Deming drill, and an additional 7 compartments for specialized requirements. Fractional & Metric Drill Dispenser Model/EDP #13190 Cabinet holds fractional drills 1/16” to 1/2” by 64ths, 1 to 60 wire gage, A to Z letter sizes and metric from 0.35mm to 13.00mm including 0.35mm to 2.50mm x .05mm, 2.6mm to 10.0mm x .1mm and 10.2, 10.5, 10.8, 11.0, 11.2, 11.5, 11.8, 12.0, 12.2, 12.5, 13.0mm. Will hold a minimum of full packages of each size. All models are 6 drawer cabinets measuring 26”W by 12”D by 15.13/16”H and ship at 75lbs. Will ship UPS. Drawers measure 23.1/8”W x 11”D x 2”H. Drills, End-Mills & Reamers Model/EDP #13700 Metric 4 in 1 Combination dispenser Drills - Metric .35mm to 2.5mm x .05mm, 2.6mm to 10mm x .1 and additional common sizes up to 13mm. End Mills - Metric 2.0 to 7.0 x .5 and 8.0, 9.0, 10.0, 11.0, 12.0, 12.5, 13.0mm and 31 of most commonly used taps from 2.5mm x .45 to 30mm x 3.50 mm Reamers - Metric 1.0mm to 13.0mm x .5 DESCRIPTION WT. LBS. PART # 1-030 Super chest with 8 drawer capacity. 256 individual drawer dividers provided. 220 530 Super cabinet with 15 drawer capacity. 480 individual drawer dividers provided. All drawers are 2” H. 375 525 Super cabinet with 8 drawers: (1) 2”H drawer and (7) 4” H drawers. 390 527 HOLD SIZES PART # 1-030 1/16” to 1/2” by 64ths 1 #1 to #60 Wire Gauge 2 A to Z letter size 3 1mm to 13mm by 0.5mm 4 1mm to 6.9mm by 0.1mm 5 #1 to #80 Wire Ga. 84 FOR DRILL SIZE PART # 1-030 Stub drills 1/16” to ½” x 64ths 1SM Stub drills 1-60 2SM Stub drills A-Z 3SM Stub drills 1mm-13mm x 0.5mm 4SM Stub drills 1mm-6.9mm x 0.1mm 5SM FOR DRILL SIZES PART # 1-030 1/16-1/2, 1-60, A-Z 13175 .35mm-13mm 13180 FOR SIZES PART # 1-030 2ea. 33/64” - 1” 13166 2ea. 1” - 1.1/2” 13167 FOR SIZES PART # 1-030 1/8” to 1” x 64th 57 PART # 1-030-1414 TAP DRILL 6-32 #36 8-32 #29 10-24 #25 10-32 #21 1/4-20 #7 1/4-28 #3 5/16-18 F TAP DRILL 5/16-24 I 3/8-16 5/16 3/8-24 Q 7/16-14 U 7/16-20 25/64 1/2-13 27/64 1/2-20 29/64 MODEL P/N: 1-030 13165 13165 13190 13190 13700 13700 - 1774 - Bass Tool & Supply, Inc. Houston Email Fax Toll Free www.basstool.com (713) 682-1889 [email protected] (713) 681-4931 800-442-0042
