Micrometer Torque Wrenches TOOTH COUNT: 120 POSITION Includes injection molded case with removable lid Low profile tube for greater access 120 Position head with 3° ratcheding arc for superior access Knurled anodized aluminum grip with beveled end for greater support Center point handle marking for accuracy High definition SAE and metric scale markings are easier to read Drive Size Primary Scale Range - Max Torque Primary Scale Increments Secondary Scale - Max Torque Secondary Scale Increments Overall Length (ins) Weight (lb) PART# 1-926 1/4” 30-200 in-lb 1 in/lb 3.95-23.16 Nm 0.11 Nm 11 0.85 85171 3/8” 10-100 ft-lb 1 ft/lb 20.3-142.4 Nm 1.4 Nm 18.5 2.55 85176 1/2” 30-250 ft-lb 2 ft/lb 54.2-352.6 Nm 2.7 Nm 24.75 3.75 85181 Electronic Torque Wrenches ● Target torque warning includes a tone, vibrating handle and backlit blue LED screen turns red when target is reached ● Range from 5 to 999 degrees ● 15 degree, thin profile flex-head for better access ● 72 tooth ratchet gear for 5° ratcheting arc ● Accuracy of 2% CW, 3% CCW from 20 - 100% range Includes five torque measurements (ft.-lb., in-lb., Nm, kg-fm, kg, fcm) ● Features ten pre-set regularly used torque settings PART# DESCRIPTION 1-926-85076 3/8” Drive Electronic Torque Wrench, 7.4 - 99.6 ft-lb 1-926-85077 1/2” Drive Electronic Torque Wrench, 25.1 - 250.8 ft-lb PART# DESCRIPTION 1-926-85078 3/8” Electronic Torque Wrench, with Angle 10 - 100 ft-lb 1-926-85079 1/2” Drive Electronic Torque Wrench, with Angle, 25 - 250 ft-lb Bolt Extraction Sockets ● Bi-directional design for removing or tightening damaged fasteners ● Tapered entry enables socket to easily seat on a damaged fastener ● Dual sized sockets designed to work with both SAE and metric fasteners ● Square drive with hex base for use with impact gun, ratchet, wrench, or pliers ● Chrome molybdenum alloy steel (Cr-Mo) for exceptional strength and long lasting durability ● High-visibility laser etched markings provide quick size identification ● Black oxide finish to resist corrosion ● Up to 10x longer impact life vs. other impact extraction sockets ● Up to 5x greater torque output vs. other impact extraction sockets ● Minus-size sockets fit a wider range of damaged fasteners DRIVE FASTENER SIZE* DRIVE END WIDTH OVERALL LENGTH LENGTH TO SHOULDER PART# 1-926- 1/4" 1/4(-) in .427 in 1.377 in .944 in 84750 1/4 in .427 in 1.377 in .944 in 84751 7(-) mm .456 in 1.377 in .944 in 84752 7 mm .456 in 1.377 in .944 in 84753 8(-) mm, 5/16(-) in .5 in 1.377 in .944 in 84754 8 mm, 5/16 in .5 in 1.377 in .944 in 84755 3/8" 3.8(-) in .629 in 1.377 in .944 in 84756 3/8 in .629 in 1.377 in .944 in 84757 10(-) mm .629 in 1.377 in .944 in 84758 10 mm .629 in 1.377 in .944 in 84759 11(-) mm, 7/16(-) in .696 in 1.377 in .944 in 84760 11 mm, 7/16 in .696 in 1.377 in .944 in 84761 12(-) mm .763 in 1.377 in .944 in 84762 12 mm .763 in 1.377 in .944 in 84763 1/2(-) in .799 in 1.377 in .944 in 84764 13(-) mm, 1/2 in .799 in 1.377 in .944 in 84765 13 mm .799 in 1.377 in .944 in 84766 14(-) mm .862 in 1.377 in .944 in 84767 14 mm, 9/16(-) in .862 in 1.377 in .944 in 84768 9/16 in .862 in 1.377 in .944 in 84769 16(-) mm, 5/8(-) in .94 in 1.377 in .944 in 84770 16 mm, 5/8 in .94 in 1.377 in .944 in 84771 17(-) mm 1.019 in 1.377 in .944 in 84772 17 mm 1.019 in 1.377 in .944 in 84773 11/16(-) in 1.019 in 1.377 in .944 in 84774 11/16 in 1.019 in 1.377 in .944 in 84775 19(-) mm, 3/4(-) in 1.102 in 1.377 in .944 in 84776 19 mm, 3/4 in 1.102 in 1.377 in .944 in 84777 * Sizes shown with a minus sign (-) are designed to fit worn out fasteners that otherwise will slip into the socket 8 Pc. 1/4" and 3/8" Drive Bolt Biter™ Extraction Socket Set Set includes: 1/4" Drive: 7mm, 5/16" (8mm) 3/8" Drive: 10mm, 7/16" (11mm), 12mm, 13mm, 9/16 (-) (14mm), 3/8 (16mm) Part# 1-926-84782 Sledge Head Dead Blow Hammers ● Canister filled with steel shot in the hammer's head creates a dead blow effect to reduce rebound ● Non-sparking, hot-cast polyurethane body covers the steel shot chamber and the steel reinforced handle; no exposed metal WEIGHT FACE DIAMETER OVERALL LENGTH PART # 1-926- 5.5 lb 2.75 20 69-550G 9.0 lb 2.75 30 69-551G 10.5 lb 3.25 30 69-552G 12.0 lb 3.25 36 69-554G Dead Blow Hammers With Fiberglass Handles ● Canister filled with steel shot in the hammer's head creates a dead blow effect to reduce rebound ● Non-sparking thermoplastic head material covers the steel shot chamber and doesn't mar surfaces WEIGHT FACE DIAMETER OVERALL LENGTH PART # 1-926- 1.67 lb 1.875 12.25 69-501G 2.5 lb 2.125 14 69-503G 2.5 lb 2.125 14 69-503G 3.5 lb 2.375 14.25 69-505G Sledge Hammers WEIGHT FACE DIAMETER OVERALL LENGTH PART # 1-926- 3.635 lb 1.625 in 14 69-700G 4.250 lb 1.75 in 14 69-701G 8.145 lb 1.812 in 24.5 69-703G 9.0 lb 2 in 24.75 69-705G 9.0 lb 2 in 32 69-707G 11.0 lb 2.125 in 32 69-709G 12.0 lb 2.25 in 32.25 69-711G ● Drop-forged head built from alloy steel and finished in black with a polished face and bevels ● Handle has a fiberglass core with a polypropylene wrap to provide strength and durability Brass Head Sledge Hammers WITH TETHER READY FIBERGLASS HANDLES WITH TETHER READY FIBERGLASS HANDLES ● Non-sparking brass head with two polished striking faces ● Handle has a fiberglass core with a polypropylene wrap to provide strength and durability WEIGHT FACE DIAMETER OVERALL LENGTH PART # 1-926- 2.940 lb 1.312 14 69-717G 4.375 lb 1.625 14 69-719-G Soft Face Hammers ● Ideal for light-duty assembly applications where you don't want to mar the surface ● Replaceable tips available in a range of hardness ratings WEIGHT FACE DIAMETER OVERALL LENGTH PART # 1-926- 0.765 lb 1 11.25 69-003G 0.935 lb 1.5 12.5 69-009G 1.010 lb 1.5 12.5 69-013G 1.360 lb 2 13.75 69-017G 2.055 lb 2 13.75 69-019G 5.315 lb 3 15 69-033G Soft Face Tips DIA. HARDNESS PART # 1-926- 1 Medium 69-143G 1 Tough 69-145G 1 Med. Hard 69-146G 1 Hard 69-148G 1 Extra Hard 69-149G 1.5 Medium 69-153G 1.5 Tough 69-155G 1.5 Med. Hard 69-156G DIA. HARDNESS PART # 1-926- 1.5 Hard 69-158G 1.5 Extra Hard 69-159G 2 Medium 69-163G 2 Tough 69-165G 2 Med. Hard 69-166G DIA. HARDNESS PART # 1-926- 2 Hard 69-168G 2 Extra Hard 69-169G 3 Soft 69-182G 3 Medium 69-183G Soft Face Hammer ● Available replacement tips 82260S (Soft) 82260H (Medium Hard) ● Alloy steel handle for strength and durability ● Comes with soft (cream) and medium hard (yellow) tips WEIGHT FACE DIAMETER OVERALL LENGTH PART # 1-926- 1.1 lb 1.1/4" 15" 82260 - 1756 - Bass Tool & Supply, Inc. Houston Email Fax Toll Free www.basstool.com (713) 682-1889 [email protected] (713) 681-4931 800-442-0042
