“FEELER” STOCK IN ROLLS This handy product includes thickness stock, housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gaging narrow slots, etc. This stock is also useful for shimming in fixturing and die work. ● Now available in stainless and tempered steel ● Handy 25' and 7.6m rolls 1/2" and 12.7mm wide, in a compact, sturdy plastic rewindable dispenser case. This case handles stock up to .015" and 0.35mm only. ● Rewind feature permits retracting thinner feeler stock into the case, preventing damage ● Roll stock in thicknesses of .016" or 0.40mm and over are furnished in 20' or 6m (nondispensable) rolls in a cardboard box. Also, the .0005", 25' size is furnished in a cardboard box. ● Marked every 6" or 150mm with a line, thickness in thousandths of an inch or in hundredths of a mm (exception 666-1/2) ● Case provides the ability to snip off the desired length without any waste “FEELER” STOCK These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. ● Now available in stainless and tempered steel ● Inch sizes are 12” long, 1/2” wide and furnished in 33 different thicknesses ranging from .0005-.030” ● Millimeter sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03-0.50mm ● Rounded ends make stock easier to work with ● Made of the finest tempered steel and stainless steel ● Each piece marked every 6” with thickness (exception 667-1/2) and in individual envelope ● With convenient 3/16” (5mm) hole punched in the end for hanging Two complete, handy thickness gage assortments: S667A (Inch) set consists of one each of 32 different pieces, 1/2" x 12" long from .001" through .030" thick (the entire individual range, with exception of the .0005" thickness, as listed on previous page). S667MA (Millimeter) set consists of one each of 14 different pieces, 12.5mm x 300mm long from 0.03mm through 0.50mm thick (complete range, as on previous page). S667D Bulk inch-reading assortment consists of 108 pieces, 1/2" x 12", in nine different thicknesses from .0015" to .015" thick. Twelve pieces of a size are packed in a box and each piece in an individual envelope. The nine boxes, together with an extra box for holding odd pieces, are packed in a convenient storage carton. THICKNESS GAGE OR “FEELER” STOCK ASSORTMENTS INCH MILLIMETER THICKNESS GAGE ● Now available in stainless and tempered steel ● All include locking device ● Leaves are easily removed or replaced Inch Reading Thickness Gages with Straight Leaves Inch Reading Thickness Gages with Tapered Leaves Inch Reading Rolls – Dispenser Case Tempered Steel Stainless Steel Length Thickness Cat. No. P/N: 1-STR- Cat. No. P/N: 1-STR- 25’ .001" 666-1 52796 666S-1 73350 .0015" 666-1.1/2 52797 666S-1.1/2 73351 .002" 666-2 52798 666S-2 73363 .0025" 666-2.1/2 52799 666S-2.1/2 73364 .003" 666-3 52800 666S-3 73371 .004" 666-4 52801 666S-4 73372 .005" 666-5 52802 666S-5 73373 .006" 666-6 52803 666S-6 73374 .007" 666-7 52804 666S-7 73375 .008" 666-8 52805 666S-8 73376 .009" 666-9 52806 666S-9 73377 .010" 666-10 52807 666S-10 73353 .011" 666-11 52808 666S-11 73354 .012" 666-12 52809 666S-12 73355 .013" 666-13 52810 666S-13 73356 .014" 666-14 52811 666S-14 73357 .015" 666-15 52812 666S-15 73358 Inch Reading Rolls – Cardboard Box Tempered Steel Stainless Steel Length Thickness Cat. No. P/N: 1-STR- Cat. No. P/N: 1-STR- 25’ .0005” 666-1/2 64210 666S-1/2 73352 20’ .016" 666-16 52813 666S-16 73359 .017" 666-17 52814 666S-17 63370 .018" 666-18 52815 666S-18 73361 .019" 666-19 52816 666S-19 73362 .020" 666-20 52817 666S-20 73365 .021" 666-21 52818 666S-21 73366 .022" 666-22 52819 666S-22 73367 .023" 666-23 52820 666S-23 73368 .024" 666-24 52821 666S-24 73369 .025" 666-25 52822 666S-25 73370 Millimeter Reading Rolls – Dispenser Case Tempered Steel Length Thickness Cat. No. P/N: 1-STR- 7.6m 0.03mm 666M-3 52823 0.04 mm 666M-4 52824 0.05mm 666M-5 52825 0.06mm 666M-6 52826 0.08mm 666M-8 52827 0.10mm 666M-10 52828 0.15mm 666M-15 52829 0.20mm 666M-20 52830 0.25mm 666M-25 52831 0.30mm 666M-30 52832 0.35mm 666M-35 52833 Millimeter Reading Rolls – Dispenser Case Tempered Steel Length Thickness Cat. No. P/N: 1-STR- 6.1m 0.40mm 666M-40 52834 0.45mm 666M-45 52835 0.50mm 666M-50 52836 Inch Gages - 12” Tempered Steel Stainless Steel Thickness Cat. No. P/N: 1-STR- Cat. No. P/N: 1-STR- .0005" 667-1/2 64209 667S-1/2 73394 .001" 667-1 52837 667S-1 73392 .0015" 667-1.1/2 52838 667S-1.1/2 73393 .002" 667-2 52839 667S-2 73405 .0025" 667-2.1/2 52840 667S-2.1/2 43706 .003" 667-3 52841 667S-3 73417 .004" 667-4 52842 667S-4 73419 .005" 667-5 52843 667S-5 73420 .006" 667-6 52844 667S-6 73421 .007" 667-7 52845 667S-7 73422 .008" 667-8 52846 667S-8 73423 .009" 667-9 52847 667S-9 73424 .010" 667-10 52848 667S-10 73395 .011" 667-11 52849 667S-11 73396 .012" 667-12 52850 667S-12 73397 .013" 667-13 52851 667S-13 73398 .014" 667-14 52852 667S-14 73399 .015" 667-15 52853 667S-15 73400 .016" 667-16 52854 667S-16 73401 .017" 667-17 52855 667S-17 73402 .018" 667-18 52856 667S-18 73403 .019" 667-19 52857 667S-19 73404 .020" 667-20 52858 667S-20 73407 .021" 667-21 52859 667S-21 73408 .022" 667-22 52860 667S-22 73409 .023" 667-23 52861 667S-23 73410 .024" 667-24 52862 667S-24 73411 .025" 667-25 52863 667S-25 73412 .026" 667-26 52864 667S-26 73413 .027" 667-27 52865 667S-27 73414 .028" 667-28 52866 667S-28 73415 .029" 667-29 52867 667S-29 73416 .030" 667-30 52868 667S-30 73418 Millimeter Gages – 300mm Thickness Cat. No. P/N: 1-STR- 0.03mm 667M-3 52869 0.04mm 667M-4 52870 0.05mm 667M-5 52871 0.06mm 667M-6 52872 0.08mm 667M-8 52873 0.10mm 667M-10 52874 0.15mm 667M-15 52875 0.20mm 667M-20 52876 0.25mm 667M-25 52877 0.30mm 667M-30 52878 0.35mm 667M-35 52879 0.40mm 667M-40 52880 0.45mm 667M-45 52881 0.50mm 667M-50 52882 Individual Assortments Tempered Steel Stainless Steel Cat. No. P/N: 1-STR- Cat. No. P/N: 1-STR- Description S667A 63274 S667AS 73443 Complete Starrett inch thickness gage assortment – One each, 32 different sizes S667MA 64949 Complete Starrett millimeter thickness gage assortment – One each, 14 different sizes Bulk Assortment Tempered Steel Stainless Steel Cat. No. P/N: 1-STR- Cat. No. P/N: 1-STR- Description S667D 52883 S667DS 73444 Bulk quantity assortment: 108 pieces in nine thickness sizes; 12 pieces of a size per box; .0015, .002, .003, .004, .006, .008, .010, .012, .015” Packed 12 pieces of a size in a box; each piece in individual envelope; 9 boxes in a carton. No. of Leaves Size Leaves Range Tempered Steel Stainless Steel Leaf Thickness (in) Cat. No. P/N: 1-STR- Cat. No. P/N: 1-STR- 9 1/2 x 3.1/32" .0015, .002, .003, .004, .006, .008, .010, .012, .015 172A 50649 172AS 50649 26 1/2 x 3.1/32" .0015, .002, .0025, .003, .004, .005, .006, .007, .008, .009, .010, .011, .012, .013, .014, .015, .016, .017, .018, .019, .020, .021, .022, .023, .024, .025 66 50314 66S 73466 31 1/2 x 3.1/32" .0015, .002, .0025, .003, .004, .005, .006, .007, .008, .009, .010, .011, .012, .013, .014, .015, .016, .017, .018, .019, .020, .021, .022, .023, .024, .025, .026, .028, .030, .032, .035 66B 57097 66BS 73439 13 1/2 x 4.1/2" .0015, .002, .003, .004, .006, .008, .010, .020, .030, .040, .075, .100, .200 467 52464 467S 73340 8 1/2 x 12" .002, .003, .004, .005, .006, .008, .010, .015 172E 50654 172ES 73343 22 1/2 x 3.1/32" .0015, .002, .0025, .003, .004, .005, .006, .007, .008, .009, .010, .012, .013, .014, .015, .016, .018, .020, .022, .025, .030, .035 6 Spark Plug Wire Gages: .025, .030, .034, .035, .040, .045 572A 57098 22 1/2 x 3.1/32" .0015, .002, .0025, .003, .004, .005, .006, .007, .008, .009, .010, .012, .013, .014, .015, .016, .018, .020, .022, .025, .030, .035 572B 57099 No. of Leaves Size Leaves Range Tempered Steel Stainless Steel Leaf Thickness (in) Cat. No. P/N: 1-STR- Cat. No. P/N: 1-STR- 26 1/2-1/4 x 3.1/32" .0015, .002, .0025, .003, .004, .005, .006, .007, .008, .009, .010, .011, .012, .013, .014, .015, .016, .017, .018, .019, .020, .021, .022, .023, .024, .025 66T 50315 66TS 73442 9 1/2-1/4 x 3.1/32" .0015, .002, .003, .004, .006, .008, .010, .012, .015 172AT 50650 172ATS 73342 8 1/2-1/4 x 6" .002, .003, .004, .006, .008, .010, .012, .015 172CT 50652 Millimeter Reading Thickness Gages with Straight Leaves No. of Leaves Size Leaves Range Tempered Steel Leaf Thickness (in) Cat. No. P/N: 1-STR- 20 12.7 x 77mm 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.0 66MA 55974 13 12.7 x 77mm 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.30, 0.40, 0.50 173MA 57086 13 12.7 x 114mm 0.04, 0.05, 0.06, 0.07, 0.08, 0.10, 0.15, 0.20, 0.30, 1.0, 2.0, 3.0, 5.0 467M 52465 Millimeter Reading Thickness Gages with Tapered Leaves No. of Leaves Size Leaves Range Tempered Steel Leaf Thickness (in) Cat. No. P/N: 1-STR- 9 12.7-7 x 114mm 0.04, 0.05, 0.06, 0.07, 0.08, 0.10, 0.15, 0.20, 0.30 172MBT 50656 13 12.7-7 x 77mm 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.30, 0.40, 0.50 173MAT 57087 13 12.7-7 x 152mm 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.30, 0.40, 0.50 173MCT 57088 - 1726 - Bass Tool & Supply, Inc. Houston Email Fax Toll Free www.basstool.com (713) 682-1889
[email protected] (713) 681-4931 800-442-0042