INDUSTRIAL CLEANERS INDUSTRIAL CLEANERS CITRUS CUTTER PREMIUM ALL-PURPOSE CLEANER TUFF-CUT HDF HEAVY DUTY CLEANER ● Powerful natural citrus floor cleaner and degreaser ● Can be used in automatic floor scrubbers ● Water based ● 100% biodegradeable ● Will remove heavy grease and oil deposits ● Non-flammable ● Heavy duty floor cleaner for difficult industrial applications ● Used also as a general purpose maintenance cleaner for most industrial and commercial cleaning jobs ● Can be used in automatic floor scrubbers ● Non-flammable ● Will remove: dyes & inks, flux residues, light oil & lubricants, oily emulsions ● Synthetic cutting & grinding fluids Used on: ● Equipment ● Tools SIZE PART # 5 GAL. QC-CIT.CUTTER-5 55 GAL. QC-CIT.CUTTER-55 310 GAL. QC-CIT.CUTTER-310 SIZE PART # 5 GAL. QC-TUFF-5 55 GAL. QC-TUFF-55 310 GAL. QC-TUFF-310 Q-GUARD 630 is a synthetic water based rust preventive. The product is designed for use on ferrous metals and leaves an imperceptible film. Q-GUARD 630 is designed as an in-process corrosion preventative for indoor storage protection. Recommended Dilutions: Q-GUARD 630 can be applied to ferrous metals by spray or dip applications. The product can be used in the last stage of a spray washer or in stand alone dip tanks. The product mixes easily with water. The recommended operating concentration is 2-10% depending on the length of protection needed. The product is designed to give 10 months indoor storage protection if used at 10%. Q-GUARD 630 can be heated to facilitate drying. Q-GUARD 630 - WATER BASE RUST PREVENTATIVE Q-SHIELD 660 is a general-purpose rust preventative and dewatering fluid. The product is a solvent-based corrostion preventative that leaves a very thin to imperceptible greasy film. It displaces freestanding water, emulsions, and alkaline cleaners with a protective film that provides up to nine months indoor corrosion protection. Recommended Applications: Q-SHIELD 660 is designed to be used staight. To achieve maximum corrosion protection and water displacement, parts should be dipped into Q-SHIELD 660. Effective results can also be achieved by spraying if the equipment can provide a sufficient and uniform coating of Q-SHIELD 660. Concentration Control Q-SHIELD 660 can be readily removed with alkaline or solvent cleaners. Q-SHIELD 665 is a solvent-based corrosion preventative that leaves a very thin to imperceptible greasy film. It displaces freestanding water, emulsions, and alkaline cleaners with a protective film that provides up to twelve months indoor corrosion protection. Recommended Applications: Q-SHIELD 665 is designed to be used straight. To achieve maximum corrosion protection and water displacement, parts should be dipped into Q-SHIELD 665. Effective results can also be achieved by spraying if the equipment can provide a sufficient and uniform coating of Q-SHIELD 665. Q-SHIELD 660 - SOLVENT BASED CORROSION PREVENTATIVE Q-SHIELD 665 - SOLVENT-BASED CORROSION PREVENTATIVE Q-GUARD 630 SIZE PART # 5 GAL. QC-QG630-5 55 GAL. QC-QG630-55 310 GAL. QC-QG630-310 Q-SHIELD 660 SIZE PART # 5 GAL. QC-QS660-5 55 GAL. QC-QS660-55 310 GAL. QC-QS660-310 Q-SHIELD 665 SIZE PART # 5 GAL. QC-QS665-5 55 GAL. QC-QS665-55 310 GAL. QC-QS665-310 • CLEANS • DISPLACES MOISTURE • LUBRICATES • LOOSENS RUST • PROTECTS Q-PEN 40 is specially formulated as a combination inhibitor, penetrating oil and lubricant for a wide variety of applications. It also functions as a powerful cleaning solvent for parts that are sprayed or dipped in the material. When parts are sprayed or dipped, Q-PEN 40 penetrates and lubricates moving parts such as wheels, hinges, gears and chains and will also function to loosen and free stuck parts such as nuts, bolts, valves and locks. Q-PEN 40 - INHIBITOR/PENETRATING AGENT/LUBRICANT Q-PEN 40 SIZE PART # 5 GAL. QC-QP40-5 55 GAL. QC-QP40-55 CORROSION & RUST PREVENTATIVES Q Q-KOAT 645 is a general-purpose high flash rust preventative. This product utilizes an oil base stock with a corrosion preventative that leaves a thin to imperceptible greasy film. It displaces freestanding water, emulsions, and alkaline cleaners with a protective film that provides up to twelve months indoor corrosion protection. Q-KOAT 645 - OIL BASED CORROSION PREVENTATIVE Q-KOAT 645 SIZE PART # 5 GAL. QC-QK645-5 55 GAL. QC-QK645-55 310 GAL. QC-QK645-310 Recommended Applications: Q-KOAT 645 is designed to be used straight. To achieve maximum corrosion protection and water displacement, parts should be dipped into Q-KOAT 645. Effective results can also be achieved by spraying if the equipment can provide a sufficient and uniform coating of Q-KOAT 645. Concentration Control: Q-KOAT 645 can be readily removed with alkaline or solvent cleaners. Applications — all purpose cleaning, floor cleaning, general-purpose cleaning, hard surface cleaning, immersion tanks, machine cleaning outside, multi-purpose cleaning, and spray bottle Soils — coolant residues, heavy oils, and light oils Metals — brass, cast iron, copper, steels, and zinc ● Use full strength or dilute up to 100:1 ● For the toughest industrial cleaning ● applications ● Pratt Whitney Aerospace Approval PMC 1247-1 ● Contains no butyl, caustic, silicate, ● phosphate, nitrite, phenol, or borate ● Very low V.O.C. content, and conductivity ● Environmentally friendly, certified "Readily ● Biodegradable" by OECD Method 301D ● (EPA Guideline OPPTS 835.3110) ● Will not harm TRIM metalworking fluids Task2™ GF GRIME FIGHTER, SUPER STRENGTH INDUSTRIAL CLEANER Applications — automatic floor scrubbers, floor cleaning, general-purpose cleaning, hard surface cleaning, mop bucket cleaning, multipurpose cleaning, parts washing, and spray bottle ● Formulated without silicates or other high pH additives, CLEAN F2 is compatible with ultrafiltration systems and bioremediation ● CLEAN F2 has been proven nonirritating to skin at 20% concentration ● Excellent choice for use in spray bottles up to 20% ● Use for general cleaning tasks and to remove soils from parts and tools ● Operators like CLEAN F2's mild, pleasant citrus scent ● Environmental approvals are simplified because CLEAN F2 contains no nitrites, barium, phenols, or butyl cellusolve; and has very low V.O.C. content and no SARA 313 reportable ingredients ● Effective mop bucket cleaner ● Use in floor scrubber machines CLEAN F2™ MULTI-PURPOSE CLEANER SIZE PART# 1-GALLON JUG 1-MAS-CLEANF2-1G 5-GALLON JUG 1-MAS-CLEANF2-5G 54-GALLON JUG 1-MAS-CLEANF2-54G 270-GALLON JUG 1-MAS-CLEANF2-270G SIZE PART# 1-QUART BOTTLE 1-MAS-TASK2GF-QT 1-GALLON JUG 1-MAS-TASK2GF-1G 5-GALLON PAIL 1-MAS-TASK2GF-5G 54-GALLON DRUM 1-MAS-TASK2GF-54G * ADD: '5' - FOR 5 GALLON PAIL '55' - FOR 55 GALLON DRUM Product description: The Mobil DTE™ Oil Named Series of lubricants are premium performance circulating lubricants designed for applications in systems where long lubricant service life is required. Mobil DTE Oil Named Series lubricants are formulated from highly refined base stocks and an additive system which provide an extremely high level of chemical and thermal stability, rapid and complete separation from water and a high resistance to emulsification. They provide excellent protection against rust and corrosion, including resistance to salt water, and good antiwear properties. DTE Oil Named lubricants are used widely in steam turbines and hydroturbines with splash, bath and ring-oiling arrangements, and all other continuous circulation methods involving pumps, valves and ancillary equipment. This product series is recommended for continous service in the lubrication of plain and rolling bearings and parallel shaft gearing. They have also been used successfully in rotary air compressor applications and reciprocating natural gas compressors as well as vacuum pumps. Features and benefits: DTE™ OIL PART# 1-444-DTE-32-* 1-444-DTE-46-* 1-444-DTE-68-* 1-444-DTE-100-* TYPICAL PROPERTIES MOBIL DTE NAMED SERIES DTE Light DTE Medium DTE Medium- Heavy DTE Heavy ISO Viscosity Grade, ASTM 445 32 46 68 100 cSt @ 40°C 31 44.5 65.1 95.1 cSt @ 100°C 5.5 6.9 8.7 10.9 Viscosity Index, ASTM D 2270 102 98 95 92 Pour Point, °C, ASTM D 97 -18 -15 -15 -15 Flash Point, °C, ASTM D 92 218 221 223 237 Rust protection, ASTM D 665 (Distilled & Sea Water) PASS PASS PASS PASS FEATURES ADVANTAGES AND POTENTIAL BENEFITS Very high level of chemical and thermal stability and resistance to sludging and varnishing Long oil charge life in circulation systems and reduced oil replacement costs. Less unplanned downtime and reduced maintenance costs Excellent water release properties Improved operating efficiency Very good antiwear protection Longer equipment life, reduced maintenance and downtime Long term protection against rust and corrosion Longer equipment life, reduced maintenance and downtime High resistance to foaming and excellent air release Avoids pump cavitation, noisy and erratic operation Highly versatile - multiple applications Rationalize inventory, reduced inventory costs CIRCULATING LUBRICANTS - 1686 - Bass Tool & Supply, Inc. Houston Email Fax Toll Free www.basstool.com (713) 682-1889 [email protected] (713) 681-4931 800-442-0042
