PART# 8-500- 6PJS PARALLEL KEEPER Place parallels in the vise against the jaws, squeeze the Parallel Keeper together and slide into place against the parallels and release. The Parallel Keeper’s spring tension will hold both parallels against the jaws. This 6” magnetic jaw set from Kurt comes complete with two jaw plates with an embedded rare earth magnet for holding the parallels in place, leaving hands free to hold and clamp the workpiece. Genuine Kurt Groove Lock workstops are also included, all in it’s own convenient plastic storage box. MAGNETIC JAW PLATE & PARALLEL SET FOR 6” VISE This 11 Piece Set Includes: Features: GROOVE LOCK® REVERSIBLE STYLE STEP JAW PLATES SIDEWINDER™ VISE FOR 2nd OPERATION WORK HOLDING FOR 4” & 6” VISES ● Machining can be done on both vises in the same setup ● Vise is at an elevated position which is more conducive to longer reach machining ● Has a stabilizer foot for vibration control ● Can be mounted to the back of any Kurt industry standard 6" vise (model SWD25II) or 6" & 8" (model SWD35) ● Does not interfere with the host vise For doing 2nd op work holding the part vertically rather than horizontally. PARALLEL SETS - 8” LONG PARALLELS 6 Pair Set Features: ● 1.000”, 1.250”, 1.500”, 1.750”, 2.000”, 2.125” Heights. ● 0.250” ±0.002” Thickness. ● 0.0002” Parallelism. ● 1 ea. Plastic storage box. ● Weight 12 lbs. ANGLOCK VISE WORK STOPS 9 Pair Set Features: ● 1.000”, 1.250”, 1.375”, 1.500”, 1.625”, 1.750”, 1.875”, 2.000”, 2.125” Heights. ● 0.250” ±0.002” Thickness. ● 0.0002” Parallelism. ● 1 ea. Plastic storage box. ● Weight 17 lbs. FEATURES: ● Versatile, quick, mounting work stops. ● Permits fast, accurate position on repetitive work. ● Teams up with your Anglock precision vises for accurate production. MAGNETIC WORK-STOP ● Fast, accurate positioning of parts. ● No need for connecting bolts or screws. ● Body is 2.5/8” long with 2” adjustable stop pins on both ends of body. PART# 8-500-2MWS WORK-STOP FOR KURT HIGH DENSITY VISES New adjustable workstop can be used on the sides of all Kurt high-density vises. The body clamp has a 2” adjustment and features a 3” long stop pin for fast and easy setups. A long and short spacer is also available to fit almost any application. HDL VISE STANDARD VISE Unit screws onto side of vise. ● 7 preset angles built-into the jaw plates (5°, 10°, 15°, 20°, 25°, 30°, 45°) ● Tolerance between holes is ±0.0004” (0.01mm) ● Eliminates time consuming set ups ● Doubles as a convenient workstop ● Triples as a parallel ● Does the work of 3 different products! Sets include: ● (2) jaw plates ● (4) pins 6mm x 22mm (0.87”) ● (3) pins 6mm x 40mm (1.58”) ● (3) pins 6mm x 58mm (2.28”) ● (3) pins 6mm x 76mm (2.99”) - Tolerance ±0.0007” (0.018mm) 3-IN-ONE SYSTEM JAW PLATES 6" & 8" PART#: 8-500-8PS6 PART#: 8-500-8PS9 ● Pull type vise ● Saves set up time for 2nd op vertical work FOR VISE PART# 8-500 6” KPS-6000 8” KPS-8000 VISE SIZE PART# 8-500 DIM “A” DIM “B” DIM “C” DIM “D” DIM “E” 4” D40-316 1.374 1.250 0.672 0.547 3.969 6” D60-316 1.880 1.700 0.735 0.547 5.969 FOR VISE SIZE PART# 8-500 4” VISE D30-45 6” VISE 360PWS 8” VISE D80WS DESCRIPTION SIZE PART# 8-500 Workstop 5/16-18 6AWS Short Spacer 6AWS-288 Long Spacer 6AWS-289 DESCRIPTION SIZE PART# 8-500 Workstop M8 x 1.25 6AWSM Short Spacer 6AWSM-288 6Long Spacer 6AWSM-289 MODEL FOR VISES PART# SWD25II 6" 8-500-SWD25II SWD35 6" & 8" 8-500-SWD35 SIZE DIMENSIONS PART# 6" 6" x 1.735" x 0.725" 8-500-KSJ6 8" 8" x 2.20" x 1.075" 8-500-KSJ8 ● 2 ea. 3/16” x 1” x 6” ground steel parallels ● 2 ea. 3/16”x 1.1/4”x 6”ground steel parallels. ● 2 ea. 3/16”x 1.1/2”x 6”ground steel parallels ● 1 ea. D60-7 - MAG hardened jaw plate with rare earth magnet. (see above) ● 1 ea D60-315-SAMAG hardened GrooveLock jaw plate with rare earth magnet. ● 1 ea. WSRL46 Kurt Groove Lock workstop ● 1 ea. WSRLE46 Kurt Groove Lock extended workstop ● 1 ea. plastic storage box. ● Fits all Kurt 6” vises. ● Powerful rare earth magnets hold the parallels in place securely. ● Genuine Kurt Groove Lock workstops are included. ● Storage box helps keep you organized. ● Ground steel jaw plates and parallels. ● 8 lbs. - 1538 - Bass Tool & Supply, Inc. Houston Email Fax Toll Free www.basstool.com (713) 682-1889 [email protected] (713) 681-4931 800-442-0042
