SHANK PART # 500- PRICE 3/4" 202-1279 PART # 123- PRICE 4401-0049 SHANK PART # 1-MED PRICE EACH 3/4" 5440000 SHANK PART # 1-MED PRICE EACH 3/4" 5440015 PART # 123- POWER PRICE 902-0035 20X SHANK PART # 1-MED PRICE EACH 1" 5440010 P/N: 1-MED PRICE 5440020 DESCRIPTION PART # SPI- PRICE Electronic Edge Finder 13-145-8 Repl. Bulb 13-154-0 ELECTRONIC EDGE FINDER & HEIGHT OFFSET GAGES Shank Diameter: 3/4” Probe Diameter: .310” Overall Length: 3.875” ● One-piece construction for strength and accuracy ● Tool steel hardened to 60 HRC ● Precision ground on all surfaces ● Repeatability TIR within .0002” ● High sensitivity probe for accurate positioning ● Four highly visible lights ● Supplied with 2 pcs 1.5V button battery and one AG5 battery 6.2” LONG ELECTRONIC AUDIBLE EDGE FINDER ● Unit will sound at the same time when the red lamp lights up ● Accuracy within .005 mm/.0002” ● LED light SPECIFICATIONS: Ball diameter: .394” Shank diameter: .787” Overall length: 6.2” DELUXE SHOP MICROSCOPE ● Easy focal adjustment. ● Illuminated light allows use in dark places and are adjustable. ● Operates on 2 AAA batteries. BALL BEARING “V” BLOCK FOR INSPECTION SET-UPS NOT OTHERWISE POSSIBLE USING PLAIN VEE BLOCKS! ELECTRONIC LOCATING GAGES ● Ultra sensitive solid state sensors for fast and accurate positioning. ● LED indicator lamps light up at the slightest touch of the workpiece for 365° visibility. ELECTRONIC EDGE FINDER (Made in USA) Highly sensitive for fast and accurate positioning. Lights up on contact. TIR within .0002”. 3/4” shank diameter. 400 Probe Diameter. Overall Length: 3.5/8” CENTERING GAGE Highly sensitive for aligning and adjusting tool center height. Lights up on contact. 3/4” Shank Diameter. ELECTRONIC EDGE FINDER ● Repeatability: .002” ● Reads off any electronically conductive metal. ● Cylindrical style head ● 1/2” shank ● Furnished with LED Indicator. ● Furnished in fitted case. ● Uses 2 ‘AAA’ batteries. REPLACEMENT BATTERY: PART#: 1-RAY-AL-AAA ● Available in 3 sizes with ranges of 3/64”-2.1/2”, 3/32”-5”, 3/16”-10” and up. ● Sold in matched pairs ● Offered with or W/O clamps ● Accuracy of Balls: 25 millionth of an inch sphericity on small and medium set .50 millionths of an inch on large set. ● Overall accuracy of matched pairs ±5 microns. ● Balls Rockwell C-62 - Surface finish 0.2 microinches. ● Calibrated balls are certified. ● Class 40 cast iron, used on-base and housing, is heat stabilized and seasoned. ● Spacers are hardened through and precision ground by pairs. ● Pair of blocks assembled using metrology equipment ENABLES YOU TO INSPECT AND DETECT OUT-OF-ROUND CONDITION AND LOBES WITH NO DAMAGE TO PARTS AND NO DAMAGE TO BLOCKS. 3 DIMENSIONAL ELECTRONIC SENSOR (x,y,z) ELECTRONIC with 3/4” shank ● Deluxe Edge Finder with highly sensitive LED lamp. ● Lamp lights up at just a few grams of pressure on stylus touching ferrous as well as non-ferrous metals. ● Operates even if work piece is oily. ● Includes 2 (N/1.5v) batteries. ● Precision ground stylus .400” dia. x 2.3/8” long ● Overall length: 6.1/16” ● Accuracy: ± .0001” ● Sub-zero treatment is added to prevent distortion throughout years of use. ● In addition to most convenient edge finding, the instrument can also be used as positioning tool for outside, inside and depth measurements. Balls are fixed in blocks and are not designed to rotate in use. MADE IN USA ● Spring loaded to safeguard against damage from overrun. ● Use SR-44 batteries (P/N: 1-RAY-357), 2 batteries included with each gage. ● Hardened and precision ground ELECTRONIC HEIGHT OFFSET GAGE (1" SHANK) For fast and accurate setting and measurement of vertical tool height. Lights up on contact. Height: 2” Shank: 1" MADE IN USA ● Fast and accurate “zero” finding, and starting point for all three axes (x,y, z). ● Operates in vertical and horizontal positions. ● Over travel safety zone in all three axes: xy - .100” - .200” ● Shank diameter .750” + .0000/-.0002”. ● Probe diameter .2000”, ± .0002” ● “Z” axis to reference surface 2.000” ±.0002” ● Repeatability ± .0005” EDGE-CENTER- DEPTH FINDER SIZE INSPECTION CAPACITY DIAMETER OF BALLS WT. CAP. OF PAIR WORK CAPACITY W/CLAMPS SMALL PAIR 3/64” to 2.1/2” 1/2” 220 lbs 1.1/4” MEDIUM PAIR 3/32” to 5” 15/16” 1100 lbs 2.1/2” LARGE PAIR 3/16” to 15” 1.1/2” 2000 lbs 3” SIZE PART # 1-FLE ORDER-DESCRIPTION-BALL-BEARING “V”BLOCKS SMALL 16097 PAIR BLOCKS, 2” X 2” X 1” (without clamps) & TEST BALL MEDIUM 16098 PAIR BLOCKS, 3.3/8” X 3.3/8” X 1.3/8” (without clamps) & TEST BALL LARGE 16099 PAIR BLOCKS, 4.3/4” X 4.3/4” X 2.3/8” (without clamps) & TEST BALL SMALL 16093 PAIR BLOCKS, 2” x 2” x 1” (Complete with clamps & TEST BALL) MEDIUM 16094 PAIR BLOCKS, 3.3/8” X 3.3/8” X 1.3/8” (Complete with clamps & TEST BALL) LARGE 16095 PAIR BLOCKS, 4.3/4” X 4.3/4” X 2.3/8” (Complete with clamps & TEST BALL) SHANK OAL STYLUS BEEP PART # 1-423 1/2" 4.35 .200" NO 2079 3/4" 4.15 .400" YES 2078 PART # SPI-98-316-3 MADE IN USA MADE IN USA ELECTRONIC EDGE FINDERS ● Will locate work surfaces quickly and easily at almost any angle. ● Model 2078 also “beeps” when stylus meets conductive metal surface. Great for blind and deep applications. ● No bulbs, 5 LED lights on contact with conductive metal surfaces - last for years without replacement. ● Repeatability +/- .0002 ● All work surfaces precision ground. 16095 STANDARD LENGTH SHANK OAL STYLUS BEEP PART # 1-423 3/4" 7.5 .400" YES 2080 EXTRA LONG 3/4" HEIGHT OFFSET GAGE ● Repeatability T.I.R. within 0.0002". ● Hardened and precision ground on all surfaces. ● Four visible lamps light up at the slightest touch of the workpiece with 360° visibility. ● 1.5V (x3) batteries included. ● 2" OAL, 0.312" head diameter. ● Spring loaded to safeguard against damage from overrun. 1" Shank DESCRIPTION PART # Height Offset Gage SPI-13-156-5 Repl. Battery SPI-07-310-6 Repl. Bulb SPI-13-425-4 45.98 194.40 158.40 131.09 224.34 83.60 105.47 39.84 4.36 - 1375 - Toll Free Fax Email Houston Bass Tool & Supply, Inc. 800-442-0042 (713) 681-4931 [email protected] (713) 682-1889 www.basstool.com
