- 1328 - Bass Tool & Supply, Inc. Houston Email Fax Toll Free www.basstool.com (713) 682-1889 [email protected] (713) 681-4931 800-442-0042 The PV-5110 is perfect for comparative measurements with enlarged drawings and tracing of projected images. This model increases inspection efficiency of mass-production precision parts. PV-5110 PROFILE PROJECTOR WITH 20" FORWARD TILTED SCREEN DIAMETER PART# MTI-304-919A DIMENSIONS TECHNICAL DATA (Unit: mm/inch) Note: To mount the counter (KA-212) and counter stand, approximately 300mm / 11.8" space is required on the right-hand side of the main unit. SYSTEM DIAGRAM DATA PROCESSING SYSTEM DIAGRAM *1 This is inserted in between the contour illuminator and condenser lens. *2 To denote your AC power cable add the following suffixes to the order No.: A for UL / CSA, D for CEE, DC for CCC, E for BS, K for KC, C and No suffix are required for PSE. *1 To denote your AC power cable add the following suffixes to the order No.: A for UL /CSA, D for CEE, 00 for CCC, E for BS, K for KC, C and No suffix are required for PSE. *2 The arm type cannot be used concurrently with a counter stand. For details, refer to the QM-Data200 and Vision Unit brochure. *3 Used on the stage. It is projected onto the screen to check the magnification accuracy with a reading scale. *4 Since the rotary stage section is small, if it is used for a large stage, some restrictions may be imposed on the measuring range. *5 When using a 50X or a 100X projection lens, you need to remove the stage glass in order to prevent a collision between the stage glass for the X /Y stage and the projection lens. *6 172-197 cannot mount to 172-198. 172-197 can connect directly to 176-317. *7 rotary stage 176-305 can mount to stage adapter C 176-317. 176-107, 172-378, and 172-197 can all mount to 176-305 or they can mount directly to 176-317. L1: Max. height where focusing is available L2: Max. step where focusing is available (working distance) D: Max. diameter when a cylinder generatrix is projected on the center line of the screen Note 1: ( ): When using surface illumination Note 2: Each lens set contains the condenser lenses for illumination. Note 3: D is for the case of contour illumination. Order No. View field (mm) L1 (mm) L2 (mm) d (mm) 5X Lens Set 172-401 101.6 125 60 (27) 120 10X Lens Set (Standard accessory) 172-402 50.8 181 50 120 20X Lens Set 172-403 25.4 206 60 120 50X Lens Set 172-404 10.16 87 32.4 64.8 100X Lens Set 172-405 5.08 87 22.5 45 Projected image Inverted Protractor screen Effective diameter 508mm / 20" Screen rotation Fine-ground glass Angle Reading ±360° (The counter displays up to ±370°) Resolution Digital counter (ABS/ INC mode switching), Zero Set Cross-hairs 1’ or 0.01° (switchable) 0 Line (Index) 90° solid lines Projection lens Magnification Built-in, With a LED back light Lens mount 5X, 10X (Standard accessory), 20X, 50X, 100X Magnification accuracy* Contour illumination Insert type mount Surface illumination ±0.1 % or less of nominal maginification Maximum workpiece height ±0.15 % or less of nominal maginification Contour illumination Refer to projection lens table 24 V, 150 W, 500 h Halogen bulb (512305) Mount switching system Telecentric, Heat-absorbing filter Cooling fan, 2-step (High/ Low) brightness switch Can be used in conjunction with color filter Surface illumination 24 V, 150 W, 500 h Halogen bulb (512305) Heat-absorbing filter, Adjustable condenser lens Oblique illumination (for 5X, 10X and 20X) Cooling fan, 2-step (High/ Low) brightness switch Focusing Stage part drive Manual Power supply 100 V, 110 V, 120 V, 220 V, 230 V, 240 V AC external switching Mass Approx. 210 kg / 462lbs (including X-Y stage) Power consumption Approx. 560 W * Our magnification accuracy standard only checks contour illumination (that it is ±0.1 % or less). (If the magnification accuracy under contour illumination is a permissible value, that under surface illumination will also be guaranteed to be within ±0.15 % of our standard.) Note: For the stage specification, refer to page 17. ● 5X, 10X, 20X Oblique surface illumination
