- 1316 - Bass Tool & Supply, Inc. Houston Email Fax Toll Free www.basstool.com (713) 682-1889 [email protected] (713) 681-4931 800-442-0042 P/N: MTI- A B C D E F G H 192-630-10 3.58 18.70 1.18 2.48 .59 1.30 1.77 5.31 192-631-10 4.72 25.55 1.18 2.76 .79 1.50 2.13 7.09 192-632-10 4.72 31.57 1.18 2.76 .79 1.50 2.13 7.09 192-633-10 5.91 48.35 1.38 8.39 .79 1.50 2.56 9.84 PART #: MTI- 192-630-10 192-631-10 192-632-10 192-633-10 Measuring Range 0-12” 0-18” 0-24” 0-40” 0-300mm 0-450mm 0-600mm 0-1000mm Resolution .0005”/0.01mm Accuracy (20°C) ± .001” ± .002” ± .003” Quantizing Error ± 1 count Response Speed 19.69”/s (500mm/s) Power Supply One CR2032 Lithium cell #05SAA217 Weight 10.36 lbs 19.18 lbs 20.95 lbs 43.65 lbs Standard Accessories: Scriber 900258 Scriber Clamp 901385 One CR2032 Lithium Cell 05SAA217 SELF-CONTAINED ELECTRONIC INCH/METRIC COUNTER ● Easy-to-use design. ● Double-column structure ensures high measuring accuracy. ● Display: LCD Height .394”, 6 digits and a minus sign (-). ● Functions include: Zero/ABS setting (ABS and INC modes), Preset Value Memory (ABS mode), Data hold, Presetting (ABS and INC modes), ± Counting direction changeover, Inch/mm conversion, Coarse/Fine Feed switching, Over-speed alarm, Low battery alarm. ● Carbide-tipped scriber. ● Dust/water protection level conforms to IP-40 standards. SERIES 192 FEED WHEEL, for moving Measurement Slider upward or downward, switchable to FINE or COARSE movement. Large diameter helps precise movement. Optional Wooden Cases available. 192-630-10 DIGI-MATIC HEIGHT GAGES FEATURES ABS DIGI-MATIC HEIGHT GAGES SPECIFICATIONS QM-HEIGHT SERIES WITH OR WITHOUT PNEUMATIC FLOTATION QM-Height measures height, height difference (step), inside/outside widths, inside/outside diameters, circle pitch, free-form surface maximum/minimum heights and height difference by scanning measurement*. Two subdisplay modes display the value from the previous measurements or the value from the zero/origin point. Origin points can also be set from hole centers. *Scanning measurement stroke is approx. 1 mm above and below from the start point of measurement. ● Best-in-class accuracy ±(2.4+2.1L/600) μm ● Built-in pneumatic flotation system enables smooth movement over a surface plate. Models without the air suspension feature are also available. ● Simple-to-use control panel enables most measurements to be made with a single keystroke. ● Battery life of 1200 hours in continuous use with four AA batteries, an improvement from 300 hours. (Four commercially available nickel hydride batteries can also be used.) ● Install the optional U-WAVE-T wireless measurement data communication system to output measurement data directly to Excel or SPC software on your PC. CALL FOR FULL DETAILS REGARDING FUNCTIONS AND ACCESSORIES PART #: Package w/AC adapter MTI-64PKA094B MTI-64PKA095B MTI-64PKA129B MTI-64PKA130B Inch/Metric Main unit MTI-518-241 MTI-518-243 MTI-518-245 MTI-518-247 Measuring Range (Stroke) (14 in / 350 mm) (24 in / 600 mm) (14 in / 350 mm) (24 in / 600 mm) Resolution Inch/Metric 0.001/0.005 mm 0.00005/0.0001/0.0002 in Accuracy at (20°C) Measurement*1 ± (2.4 + 2.1L/600) μm Repeatability*1 2σ ≤ 1.8 μm Perpendicularity*2 (20 ˚C) 7 μm 12 μm 7 μm 12 μm Guiding method Roller bearing Drive method Manual (wheel) Measurement principle Electromagnetic induction absolute encoder Measuring force 1.5±0.5 N Data output ports Digimatic / Digimatic 2 / USB*3 Power Supply Alkaline AA /LR6 batteries × 4 (standard accessories) / AC adapter (optional accessory)*5/ Supports NiMH (HR6) rechargeable batteries × 4 Weight 25 kg 29 kg 26 kg 30 kg Size (mm) Stroke 350 mm type: 280(W) x 273(D) x 784(H) mm Stroke 600 mm type: 280(W) x 273(D) x 1016(H) mm ▼ Receiver U-WAVE-R 02AZD810D Transmitter U-WAVE-T IP67 type: 02AZD730G Buzzer type: 02AZD880G Digimatic mini processor 264-505A 936937 (1m) 965014 (2m) Wireless Wired GO/±NG judgment by LED and display symbols ● LEDs indicate tolerance judgment status – green for GO, red for +NG, and orange for -NG. Status is also indicated by corresponding symbols appearing on the display. Inside/outside diameters, maximum/minimum heights and displacement can be measured using a standard probe ● Besides height measurement, Mitutoyo’s proprietary mechanism and firmware enables scanning measurement of inside/outside diameters, maximum/minimum heights, and height differences. Air-suspension feature ● Pressing a button on the grip activates the internal air pump. activates the internal air pump. The base rises on a cushion of air and is able to be moved smoothly over the surface plate. Note: Measurements should not be made while this function is in use as it will cause measurement error. * Possible to use the scriber for Height Gage DP-1VA PART #: MTI-570-412 MTI-570-413 MTI-570-414 Measuring Range 0-12” 0-18” 0-24” 0-300mm 0-450mm 0-600mm Resolution 0.0005 in/0.01mm Functions ON/OFF, ORIGIN, ZERO/ABS, HOLD/DATA. inch/mm conversion Maximum permissible error EMPE ±0.0015 in/±0.03 mm ±0.0020 in/±0.05 mm Drive method Slider-feed wheel (manual) Data output DIGIMATIC d1 Max. response speed Unlimited LCD character height .472" (12mm) Battery life Approx. 20,000 hours with continuous use, 5 years under normal use Three-button operation The Absolute (ABS) origin setting function memorizes a surface plate, etc. as the absolute origin. The INC (incremental) measurement function allows the setting of the origin at any position. The DATA button activates data output when the data output option is connected. The HOLD function retains displayed values when no output option is connected. 1 2 3 4 Links with U-WAVE Supports smart data collection The slider-feed wheel handle enables smooth vertical movement of the slider. Large clamp lever The large, easy-to-grip lever provides secure clamping. Optional accessories Contact Sensor Depth Gage Attachment No. 900872 No. 900878 Digimatic Mini-Processor No. 264-505A Print, Save, or Send Data Swivel clamp (with dovetail groove)* No. 900322 *For mounting test indicators, etc. Holding Bar* No. 953639 USB Input Tool No. 06AFM380F Center Probe No. 900581 ● Built-in ABSOLUTE linear encoder. This encoder eliminates the necessity of setting the reference point at every power-on. It has improved reliability because no over-speed error will occur. ● Rigid column structure ensures high measuring accuracy. ● With data output. ● Carbide-tipped scriber is provided. ● With large, smooth slider-feed wheel.
