- 1298 - Bass Tool & Supply, Inc. Houston Email Fax Toll Free www.basstool.com (713) 682-1889 [email protected] (713) 681-4931 800-442-0042 Part #: MTI- 543-266B 543-267B Resolution .00005”/0.001mm .0001”/0.001mm Measuring Range 0-.5”/0-12.7mm Accuracy (20°C) .00012”/0.003mm Quantizing error ± 1 count Stem diameter Ø3/8” Dia. Protection level *1 IP-42 Measuring force 1.5N (150gf) or less Battery Silver oxide cell (SR-44), 2pcs. 541980 Battery Life 9 months under normal use Sampling frequency *2 50 times/s Operating temperature 0°C to 40°C Storage temperature -10°C to 60°C Mass of main unit Approx. .35 lbs/ 160g Part #: MTI- 543-282 543-283 Range 0-.5” / 0-12.7mm LCD Resolution .00005” / 0.001mm .0001” / 0.001mm Accuracy (20°C) ± .00012” / 3µm Quantizing error ± 1 count Measuring Force 2N or less Steam Diameter 3/8” Dia. Contact Point .16” (Dia.) Steel Ball 900032 Power Supply DC 12/24V ± 10% (from connecting cable) Current Consumption 30mA or less Output NPN O/C (Output current: 30mA or less, Output voltage: 24V or less) Input No voltage input (input current; less than 10mA) Functions ZERO/ABS, PRESET/SET, TOL, MODE, +/-(Switching the counting direction) Part #: MTI- 575-123 (Inch/Metric Model) 575-121 (Metric Model) Measuring Range 0-1”/0-25.4mm 0-25mm LCD Resolution .0005/0.01mm 0.01mm Accuracy .0008” 0.02mm Quantizing error ± 1 count Measuring Force (Downward) 1.8N or less Stem Diameter .375 0 -.0012” 8.0mm 0 -0.009mm Data Output Digimatic output Standard Accessories Lifting Lever 1 pc. (137693) Silver-oxide cell SR-44 1 pc. (541980) Protection Level IP-42 Battery Life 20,000 hrs. P/N: MTI- Remarks 905338 Digimatic Cable (1m) 905409 Digimatic Cable (2m) 540774 Spindle Lifting Cable Part #: MTI- 543-551A 543-557A 543-553A 543-552A 543-558A 543-554A Measuring Range 0-25mm 0-50mm 0-1.0/0-25mm 0-2.0”/0-50.8mm LCD Resolution 0.001mm or 0.01mm .00005”/.0005”/.0001”/.001”/0.001mm/0.01mm Accuracy (20°C) 0.003mm 0.006mm .00012”/0.003mm .00025”/0.006mm Quantizing Error ± 1 count Measuring Force 1.8N or less 2.3N or less 1.8N or less 2.3N or less Stem (Dia.) 8mm 3/8” (.375”) Contact Point 3mm (Dia) Carbide Ball (M2.5x0.45mm) 901312 .16” (Dia) Steel Ball (4-48UNF) 900032 Power Supply AC Adapter (9V DC, 500mA) No. 526688A Data Output SPC Digimatic output Functions ZERO/ABS, PRESET, MAX/MIN HOLD, TIR, Selectable Resolution, Digital/Analog Display, Key Lock, +/- Direction, GO/NG Judgment Weight .53 lbs. .73 lbs. .53 lbs. .73 lbs. Optional Accessories 540774 Release Cable 902794 Lifting Lever 125317 Rubber Boot FEATURES IDC-CG Digimatic Indicators with Absolute Encoder for Bore Gages ● Capable of holding the minimum value ● Capable of tolerance judgement for the minimum value. ● The analog bar shows the minimum value, upper/lower limit values (in tolerance judgment) and the current value. ● Capable of presetting 3 reference values (master values), and setting a corresponding tolerance value for each. ● A data processor can be connected. Inch/Metric 543-266B For SPC output order connecting cable 905338 (1m) or 905409 (2m). *1 Protection level (IP= International Protection) according to IEC 529/JIS D0207, C0920. The level indicated is valid only if the output connector cap is installed. *2 If the spindle detecting speed is over 50µm/s, the peak value may not be displayed correctly. Accuracy is not including quantizing error. FEATURES ● Compact and economical design. ● Provided with a data output port for connection with the SPC system. ● Power supply: One SR-44 battery (541980) ● Operating temperature: 0°C - 40°C ● Membrane sealed face helps keep out contaminants. FUNCTIONS ● ON/OFF ● Origin setting ● Data Output ● Inch/mm conversion (for Inch/Metric models) ● ± direction changeover ● Error alarm ● Low battery alarm 575-123 IDC Signal Digimatic Indicator with Absolute Encoder 543-283 A special version of the IDC Type Digimatic Indicator able to output directly to a Programmable Logic Controller (PLC). FEATURES ● Direct output for a PLC. Voltage power supply is DC 12-24V. ● Absolute Encoder Technology. ● PRE-SET-Recall (ABS) and Hold-Reset via input signal. ● GO/±NG tolerance judgement is indicated by LCD & red/green LED and is output to the PLC. ● Sampling frequency is 50 times/sec. ● Origin setting retained until re-set (even after power off). ● IP-54 dust and water resistant. ● Conforms to EC directives and the following standards: *Electromagnetic Compatibility (EMC) Directive (89-336-EEC) EN55011:1992 Group 1 Class A EMC emission EN50082-2:1995 Industrial environment EMC immunity IDF Digimatic Indicator with Absolute Encoder Series 543 Color Changing LCD Inch/Metric Note: No lug back is available for these indicators. Accuracy is not including quantizing error Optional Accessories 1) Analog range 2) Upper over range 3) Upper pointer (blink) 4) Pointer 5) Lower pointer (blink) 6) Lower over range 7) Hold sign 8) Function lock 9) Relative measure Optional Accessories: SPC Cable No 936937 (1m). No 965014 (2m) Lug-on-center Back No. 101040 (Metric Model) Lug-on-center Back No. 101306 (Inch Model) Accuracy is not including quantizing error Inch/Metric Inch/Metric Standard Accessories (Included) 541980 Silver oxide cell SR-44, 2 pcs. 99MAH005A: User’s manual (English) 22.8mm Cable Length: 4m IDU Digimatic Indicator with Absolute Encoder The IDF is Mitutoyo’s elite Digimatic Indicator with maximum performance functions and the exclusive Absolute Encoder Technology, All the settings and readings are maintained even if power is switched off and these gages are immune to overspeed error. Features ● Large, backlit LCD which changes color from green to red to indicate measurements out of set tolerance (GO/±NG). ● Analog bar display with adjustable range and tolerance indicators. Ideal for process monitoring such as zero/tolerance zone approach. ● Preset ● Max./Min. Hold mode. ● TIR Function. ● Zero-Set for comparison measurements. ● Selectable resolutions. ● ± Direction. ● Function Lock (prevents unintended changes). ● SPC Digimatic output. ● External Power Supply. ● Inch/Metric 10) Reverse dir measure 11) Min peak mode 12) TIR mode 13) Max. Peak hold mode 14) Unit 15) Preset the origin 16) GO/NG judgment display Note: The IDC Signal Type Digimatic Indicators do not provide standard digimatic output for SPC.
