- 1285 - Toll Free Fax Email Houston Bass Tool & Supply, Inc. 800-442-0042 (713) 681-4931 [email protected] (713) 682-1889 www.basstool.com PART #: MTI- MEASURING RANGE LCD RESOLUTION ACCURACY DATA OUTPUT REMARKS 500-752-20 0-6”/0-150mm .0005”/0.01mm +/-.001” NO 500-762-20 0-6”/0-150mm .0005”/0.01mm +/-.001” YES 500-768-20 0-6”/0-150mm .0005”/0.01mm +/-.001” NO .075” rod depth bar 500-769-20 0-6”/0-150mm .0005”/0.01mm +/-.001” YES .075” rod depth bar 500-731-20 0-6”/0-150mm .0005”/0.01mm +/-.001” NO carbide-tipped jaws for OD measurement 500-735-20 0-6”/0-150mm .0005”/0.01mm +/-.001” YES carbide-tipped jaws for OD measurement 500-733-20 0-6”/0-150mm .0005”/0.01mm +/-.001” NO carbide-tipped jaws for OD & ID measurement 500-737-20 0-6”/0-150mm .0005”/0.01mm +/-.001” YES carbide-tipped jaws for OD & ID measurement 500-753-20 0-8”/0-200mm .0005”/0.01mm +/-.001” NO 500-763-20 0-8”/0-200mm .0005”/0.01mm +/-.001” YES 500-732-20 0-8”/0-200mm .0005”/0.01mm +/-.001” NO carbide-tipped jaws for OD measurement 500-736-20 0-8”/0-200mm .0005”/0.01mm +/-.001” YES carbide-tipped jaws for OD measurement 500-734-20 0-8”/0-200mm .0005”/0.01mm +/-.001” NO carbide-tipped jaws for OD & ID measurement 500-738-20 0-8”/0-200mm .0005”/0.01mm +/-.001” YES carbide-tipped jaws for OD & ID measurement 500-754-20 0-12”/0-300mm .0005”/0.01mm +/-.0015” NO 500-764-20 0-12”/0-300mm .0005”/0.01mm +/-.0015” YES MEASURING RANGE PART# MTI- Non-output Style 0-6"/0-150 mm 500-784 With SPC output 0-6"/0-150 mm 500-786 0-8"/0-200 mm 500-787 RANGE ACCURACY PART# MTI- 0-6"/0-150 mm ± .001" 573-701-20 0-8"/0-200 mm ± .001" 573-702-20 0-12"/0-300 mm ± .00015" 573-704-20 DIMENSIONS A B C 050001 .375" 2.187" .141" 050018 .500" 2.75" .154 ORDER NO. DESCRIPTION MTI-050001 For 4, 6, and 8" Calipers 1-PRE-002* For 4”, 6” and 8” Calipers MTI-050018 For 12" Calipers P/N: MTI- RANGE LCD RESOLUTION ACCURACY REMARKS 573-281-30 0-4” .0005” .001” with SPC output 0-100mm 0.01mm Absolute Function Type 573-282-30 0-6” .0005” .001” with SPC output 0-150mm 0.01mm Absolute Function Type RANGE PART NO. 777- PRICE INCH MM 0-6" 0-150 mm 1108-150 0-8" 0-200 mm 1108-200 0-12" 0-300 mm 1108-300 SPC Cable 7301-SPC1 SPC Software for PC included with cable COOLANT PROOF - DUST PROOF - CHIP PROOF DIGITAL CALIPER Function Origin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (on inch/metric models only) Alarm: Low voltage, Counting value composition error Technical Data Accuracy: Refer to the list of specifications Resolution: .0005"/0.01mm or 0.01mm Repeatability: .0005"/0.01mm Display: LCD. Character height 9.00mm (.35") Length standard: ABSOLUTE electromagnetic induction linear encoder Max response speed: Unlimited Battery: SR44 (1 pc/2 pcs*) (P/N: 1-RAY-357) Battery life: Approx. 5 years under normal use (1 year: over 12" / 300mm models) Dust/Water protection level: IP67 *0-300mm model With The Absolute Encoder Technology. WATER RESISTANT Optional SPC cable 40”: 05CZA624 80”: 05CZA625 Solar Coolant Proof Digimatic Calipers with Absolute Technology ● Eliminate your trips to the crib for batteries with Mitutoyo’s Solar powered coolant proof calipers. ● It’s sealed housing is IP-67 rated, meaning it’s immune to the coolants, dirt, grit and chips found in many manufacturing environments. ● .0005” / 0.01 mm resolution with ±.001” accuracy for 6” models and 8” models ● Certificate of inspection provided. Optional SPC Cables: 05CZA625 80” Caliper Cable 05CZA624 40” Caliper Cable Absolute Digimatic Offset Calipers Resolution: .0005” / 0.01 mm ● Main scale jaw can slide up and down to facilitate measurement of stepped sections. (Hard-to-get-at dimensions such as A, B, C can be accurately measured.) ● With depth bar. ● With SPC data output ● Supplied in fitted plastic case. Center Line Gages Pairs of conical probes are specially designed for dial and vernier calipers to quickly measure centerline distance. Digimatic Snap Calipers with Absolute Encoder This special version of MITUTOYO’s Digimatic Caliper features a spring- loaded mechanism to allow quick and efficient GO/NO-GO inspection. Set-up is a simple operation. Spring loaded thumb lever This caliper also features the Absolute scale which always knows its true position from the origin point. 1. Push the whole sliding unit against your masterpiece. 2. Use zero-set function to zero the Digimatic display. 3. Open and close jaws with snap lever to check workpieces. For SPC output order Connecting Cable 959149 (1m) or 959150 (2m) Replacement Battery: 541980 (1pc.) 541980-10 (10 pcs/SET) ● Recessed zero button prevents it from being pressed by accident ● Battery CR2032, includes one spare battery ● Automatic power off, move the digital unit to turn on power ● DIN862, hardened stainless steel construction, with locking clamp and thumb wheel, for outside, inside, depth and step measurements *USA MADE. ELECTRONIC CALIPERS ● Resolution:0.0005”/0.01 mm ● Buttons: zero set, power on/off, inch/mm conversion ● Data output via USB ● Supplied in fitted storage case 68.30 101.00 152.00 118.20
