- 1284 - Bass Tool & Supply, Inc. Houston Email Fax Toll Free www.basstool.com (713) 682-1889 [email protected] (713) 681-4931 800-442-0042 P/N: MTI- Range LCD Resolution Accuracy Remarks 500-170-30 0-4” .0005” ± .001” .075” Round Depth Bar 0-100mm 0.01mm 500-171-30 0-6” .0005” ± .001” 0-150mm 0.01mm 500-174-30 0-6” .0005” ± .001” with OD Carbide Jaw, Absolute Function Type 0-150mm 0.01mm 500-175-30 0-6” .0005” ± .001” with OD, ID Carbide Jaw, Absolute Function Type 0-150mm 0.01mm 500-178-30 0-6” .0005” ± .001” .075 Round Depth Bar, Absolute Function Type 0-150mm 0.01mm 500-172-30 0-8” .0005” ± .001” 0-200mm 0.01mm 500-176-30 0-8” .0005” ± .001” with OD Carbide Jaw, Absolute Function Type 0-200mm 0.01mm 500-177-30 0-8” .0005” ± .001” with OD, ID Carbide Jaw, Absolute Function Type 0-200mm 0.01mm 500-167-30 0-12” .0005” ± .0015” with OD Carbide Jaw 0-300mm 0.01mm 500-168-30 0-12” .0005” ± .0015” with OD, ID Carbide Jaw 0-300mm 0.01mm 500-173-30 0-12” .0005” ± .0015” 0-300mm 0.01mm 500-505-10 0-18” .0005” ± .002” without Depth Bar, Absolute Function Type 0-450mm 0.01mm 500-506-10 0-24” .0005” ± .002” without Depth Bar, Absolute Function Type 0-600mm 0.01mm 500-507-10 0-40” .0005” ± .003” without Depth Bar, Absolute Function Type 0-1,000mm 0.01mm P/N: MTI- Range LCD Resolution Accuracy Remarks 500-463 0-4” .0005” ± .001” .075” Round Depth Bar 0-100mm 0.01mm with SPC output 500-464 0-6” .0005” ± .001” with SPC output 0-150mm 0.01mm 500-465 0-8” .0005” ± .001” with SPC output 0-200mm 0.01mm 500-473 0-4” .0005” ± .001” .075” Round Depth Bar 0-100mm 0.01mm without SPC output 500-474 0-6” .0005” ± .001” without SPC output 0-150mm 0.01mm 500-475 0-8” .0005” ± .001” without SPC output 0-200mm 0.01mm P/N: MTI- Measuring Range LCD Resolution Accuracy (20°C) Remarks 500-195-30 0-4” .0005” ± .001” 0-100mm 0.01mm 500-196-30 0-6” .0005” ± .001” 0-150mm 0.01mm 500-159-30 0-6” .0005” ± .001” with OD Carbide Jaw 0-150mm 0.01mm 500-160-30 0-6” .0005” ± .001” with OD, ID Carbide Jaw 0-150mm 0.01mm 500-197-30 0-8” .0005” ± .001” 0-200mm 0.01mm 500-163-30 0-8” .0005” ± .001” with OD Carbide Jaw 0-200mm 0.01mm 500-164-30 0-8” .0005” ± .001” with OD, ID Carbide Jaw 0-200mm 0.01mm 500-193-30 0-12” .0005” ± .0015” 0-300mm 0.01mm 500-165-30 0-12” .0005” ± .0015” with OD Carbide Jaw 0-300mm 0.01mm 500-166-30 0-12” .0005” ± .0015” with OD, ID Carbide Jaw 0-300mm 0.01mm Response Speed 1,800 mm/s Battery Silver oxide cell SR-44 (1 pc.) P/N: 1-RAY-357 Battery Life Approx. Two years (under normal use) Display LCD 4-digit (-) sign. Character height: .295” Alarm Battery voltage low. Over speed. P/N: MTI- RANGE RESOLUTION ACCURACY REMARKS 700-123-10 0-8” / 0-200mm .001”/.01mm ± .005”/± 0.2mm No SPC output Depth Bar Provided RANGE ACCURACY PART #: 777- PRICE 0-6"/0-150mm ±.004" 1139-150 DIGIMATIC CALIPERS Digimatic Calipers With Absolute Encoders Series 500 - Featuring Position Memory and 3.5 Year Battery Life WITH SPC OUTPUT MITUTOYO’s new Absolute Encoder Digimatic Caliper offers special functions which allow it to always remember its measuring position even after the gage has been switched off. ● Origin: Allows setting of an origin starting point to be used as reference in subsequent measurements (generally set to closed jaw position). Once set, the Absolute Encoder caliper will switch on showing its true position from the origin point rather than 0.0000 as with standard models. ● Zero/ABS: Allows the display to be Zero-Set at any point along the slider for incremental comparison measurements. This switch will also allow return to the absolute mode and display of the true position from the origin point. Also provided is inch/mm conversion and SPC data output. Another outstanding feature of the Absolute Encoder Digimatic Caliper is 3.5 years of use under normal working conditions from just a single SR44 battery cell. (541980) OPTIONAL ACCESSORIES SPC Connecting Cables No. 959149 (1m), No. 959150 (2m) Digimatic Calipers With Absolute Encoder Series 500 Introducing the Digimatic MyCal E-Z Caliper featuring ABSOLUTE LINEAR ENCODER technology. It has achieved superior cost performance and ease of use by featuring only essential functions. FEATURES ● The Absolute MyCal E-Z allows direct measurements from power on. You can forget the time consuming origin setup which otherwise is required each time the power is turned on. ● Zero-setting of the display is also possible at any slider position for easy comparison measurements (incremental mode). ● Large .295” high LCD digits (.365” high LCD digits for 12” Model) allow measurement results to beat a glance. For SPC output order Connecting Cable 959149 (1m) or 959150 (2m) Replacement Battery: 541980 (1 pc.), 541980-10 (10 pcs./SET) Inch/Metric The Solar Absolute MyCAL will always turn on showing its true position. Memory of the origin point will not be lost when power is cut off even if the caliper is left in complete darkness for extended periods. Additionally, the Absolute scale provides unlimited response speed which means no more over-speed errors. For comparison measurements an incremental measurement function is also provided. OPTIONAL ACCESSORIES (For output models only) SPC Connecting Cables No.959149 (1m), No.959150 (2m) For SPC output order Connecting Cable 959149 (1m) or 959150 (2m). Specifications Quantizing Error: ± 1 count Function: ORIGIN Setting Zero/ABS, ON/OFF Inch/Metric Response Speed: Unlimited Battery: Silver oxide cell SR-44(1pc.) Part No.541980 Battery Life: Approx. 20,000 hrs. (Continuous operation) MyCal Lite Series 700 - Economy version Digimatic Caliper with all steel construction The MyCal Lite is an innovative, Digimatic® Caliper which is economically priced to allow everyone to benefit from the advantages of modern digital gages. Large LCD digits ensure error free reading in either inch or mm mode. Additionally, the zero point can be set anywhere to allow quick comparison measurements. PLASTIC ELECTRONIC CALIPER ● Buttons: on/off, zero, inch/mm ● Battery CR2032, automatic power off ● Supplied in fitted storage case ● Resolution: .0005”/0.01mm ● Made of hard plastic, non-magnetic and non-conductive, which can effectively prevent harm to the surface of workpieces from scratching by caliper Inch/Metric (SPC Output Models) Digimatic Solar Powered Caliper With Absolute Encoder (Solar CD) Series 500 - with or without SPC output Power is supplied by built-in solar cells which operate even in low light conditions down to 60 Lux. WITHOUT SPC OUTPUT ● A scale contamination detection function is implemented to detect contamination of surface and display the error message (ErrC) on the LCD. The correct value is only displayed if the contamination is removed. ● The battery life has been greatly extended with the power-conserving design permitting 3.5 years (20,000 hours) continuous operation with a single battery. Inch/Metric (Non-SPC Output Models) SPECIFICATIONS Inch/Metric 28.30
