- 1281 - Toll Free Fax Email Houston Bass Tool & Supply, Inc. 800-442-0042 (713) 681-4931 [email protected] (713) 682-1889 www.basstool.com P/N: MTI- LENGTH REMARK 902164 2.5” 547-217, 7217, 7237, 547-257 902165 4” 547-218, 7218, 7238, 547-258 P/N: MTI- RANGE LCD Resolution BASE LENGTH MEASURING FORCE ACCURACY BASE FLATNESS REMARKS 547-217A 0-8” .0005” 2.5” 1.5N .001” .0002” with Extension 0-200mm 0.01mm or less Rods (4pcs) 547-218A 0-8” .0005” 4” 1.5N .001” .0002” with Extension 0-200mm 0.01mm or less Rods (4pcs) 547-257A 0-8” .00005” 2.5” 1.2N .00012” .00008” with Extension 0-200mm 0.001mm or less Rods (4pcs) 547-258A 0-8” .00005” 4” 1.2N .00012” .00008” with Extension 0-200mm 0.001mm or less Rods (4pcs) P/N: MTI- 950-271 RANGE P/N: MTI- RESOLUTION ACCURACY IP67 0-6"/0-150 mm 571-211-20 .0005"/0.01 mm ±.001" NO 0-6"/0-150 mm 571-261-20* .0005"/0.01 mm ±.001" YES 0-8"/0-200 mm 571-212-20 .0005"/0.01 mm ±.001" NO 0-8"/0-200 mm 571-262-20* .0005"/0.01 mm ±.001" YES 0-12"/0-300 mm 571-213-30 .0005"/0.01 mm ±.0015" NO 0-18"/0-450 mm 571-214-10 .0005"/0.01 mm ±.002" NO 0-24"/0-600 mm 571-215-10 .0005"/0.01 mm ±.002" NO 0-30"/0-750 mm 571-216-10 .0005"/0.01 mm ±.0025" NO 0-40"/0-1000 mm 571-217-10 .0005"/0.01 mm ±.0025" NO RANGE P/N: MTI- DIAL RANGE GRAD. BASE LENGTH NOTE INCH 0-8" 7217A 0-1" .001" 2.1/2" with 1, 2, 4" rods 0-8" 7218A 0-1" .001" 4" with 1, 2, 4" rods METRIC 0-10mm 7210A 0-10mm 0.01mm 40mm WITH NEEDLE PROBE 0-200mm 7212 0-10mm 0.01mm 100mm with 10, 20, (2) 30, 100mm rods No. 2904 Dial Indicator is used for inch models. No. 2902 for metric. P/N: MTI- BASE SIZES 900367 7” 900368 10” 900369 12” RANGE A B C D 0-6”/0-150 mm 10.24” 2.76 1.36 .43 0-8”/0-200 mm 12.20” 0-12”/0-300 mm 16.14” 0-24”/0-600 mm 31.50” 4.33 2.01 .79 0-40”/0-1000 mm 47.24” P/N: MTI- RANGE RESOLUTION REMARKS 527-111 0-6” .001” With Fine Adjustment Feature 527-112 0-8” .001” With Fine Adjustment Feature 527-113 0-12” .001” With Fine Adjustment Feature 527-114 0-24” .001” With Fine Adjustment Feature 527-115 0-40” .001” With Fine Adjustment Feature P/N: MTI- RANGE RESOLUTION REMARKS 527-101 0-150 mm 0.02 mm With Fine Adjustment Feature 527-102 0-200 mm 0.02 mm With Fine Adjustment Feature 527-103 0-300 mm 0.02 mm With Fine Adjustment Feature 527-201 0-150 mm 0.05 mm --- 527-202 0-200 mm 0.05 mm --- DIGIMATIC DEPTH GAGES WITH ABSOLUTE ENCODER Features ● Digital readout for error-free reading. ● Use IDC Type Digimatic Indicator with Absolute Encoder. ● Face rotates 330° for use at different angles. ● Provided with a data output port for connection with SPC system. ● Power supply: Silver oxide cell (SR-44 1 pc.) ● Battery life: 5,000 hours ● Provided GO/NG judgement function and the indication of the judgement result. Standard Accessories ● Extension rods (4 pcs.): .5”, 1”, 2”, 4” ● Interchangeable stylus (1 pc.) ● Allen wrench (1pc.) ● Battery SR-44 (1 pc. No. 541980) Optional Accessories Base Only (3/8” Dia. Hole) DIAL DEPTH GAGES FOR RAPID, DIRECT THREADING MEASUREMENTS OF HOLE DEPTH ● The Dial Indicator has a precision- ground, hard-chrome-plated stem with a standard AGD 3/8” diameter. Contact point is hardened, ground and chrome-plated steel. Spindle rack, pinions and pivots are hardened stainless steel to insure long wear and continuing accuracy. Bezel is cleanly knurled and smoothly adjustable with a clamping screw for positive settings. Accuracy of the Dial Indicator exceeds Federal Specifications. Digimatic Depth Gages with Absolute Encoder (with SPC output) Inch/Metric DEPTH GAGE, ADJUSTABLE ANGLE NO. 950-271 WITH 3/32” DEPTH ROD The depth bar of this gage not only measures vertical depth as others do, but also indicates the angle in 15 degree increments. Base width: 2.9/16” Base thickness: 1/8” Depth bar: 6”, 32nds, 64ths graduations Dimension: .218” x .040” Rod: 6”, 3/32” (.094”) dia. MITUTOYO DIGIMATIC DEPTH GAGES offer convenient and accurate LCD readout for depth measurements up to 40”. Special features include in/mm selection and Zero-Set. SPC output is provided for data storage and processing. Features ● No rack, no pinion, no glass scale. Linear Scale is safely embedded in the hardened stainless steel blade. *IP67 Coolant Proof model. ● Sliding LCD unit offers push button control for in/mm selection, absolute zero setting and turning the display on and off. ● SR44 battery is supplied. Battery life is approximately 20,000 hours with normal use. ● Unlimited response speed ● Data output cables are optional. 959149 = 40” cable 959150 = 80” cable ● Base width 4" ● Rods are available in 1”, 2” and 4” lengths and may be connected for depths up to 8” (1” on Dial Indicator +1” rod +2” rod +4” rod =8”.) 10, 20, 30 and 100mm rods for Metric model. ● Spindle lifting lever for raising and lowering and spindle is maintained under spring pressure. ● Bottom surface of the base is hardened, ground and lapped for the highest degree of flatness. ● Complete with fitted carrying case. ● The Dial Indicator is attached to the base by a clamping screw and readily interchangeable with any other standard AGD dial indicator. ACCESSORIES INCH P/N: MTI- Description 301655 1” Rod 301657 2” Rod 301659 4” Rod 21JZA242 Contact Point METRIC P/N: MTI- Description 303611 10 mm Rod 303612 20mm Rod 303613 30mm Rod 303614 100mm Rod 303610 Contact Point INCH METRIC For SPC output order Connecting Cable 905338 (1m) or 905409 (2m) P/N: MTI- 950-271 DIMENSIONS IP67 ONLY ON MODELS: 571-261-20 571-262-20 547-217 VERNIER DEPTH GAGES SERIES 527 Features ● Made of hardened stainless steel ● Base and measuring faces are hardened and microlapped. ● Wider extension bases can be attached. OPTIONAL EXTENSION BASES DIGIMATIC DEPTH GAGES WITH SPC OUTPUT
