SQUARE HEADS, CENTER HEADS AND PROTRACTOR HEADS (For Combination Squares, Combination Sets and Bevel Protractors) PRECISION INSTRUMENTS PROTRACTOR HEADS - CAST IRON (Fit all sizes listed above) BLADES FOR COMBINATION SQUARES, SETS AND BEVEL PROTRACTORS ATTACHMENTS FOR COMBINATION SQUARES No. 289 Series HEIGHT GAGE AND DEPTH GAGE SET FOR COMBINATION SQUARES No. 289C This attachment fits the blades of any 12, 18, or 24 inch Combination Square or Set having blades up to 1 inch wide and permits attaching rules, blades or thin steel try-squares, up to 1 inch wide, at right angles to the blade of the square for laying out key seats, centers, scribing horizontal lines, measuring diameters. Made in two sizes as listed below. Both sizes can also be used with No. 289C attachment, shown below. Used with No. 289 A or B (see above) this set converts any 12”, 18” and 24” combination square or set having blades up to 1” wide into a height gage or depth gage. In addition to a clamp block, the set has a scriber, 6” rule (No. 610N-6) and a 6” rod, any one of which may be inserted in the clamp and locked in position. By applying the scriber, a practical height gage results. Use of the rule converts the tool to a depth gage for measuring in 64ths of an inch. With the rod used as a depth gage, small recesses and holes can also be checked. FINISH REVERSIBLE NON-REVERSIBLE MODEL NO.. 1-STR MODEL NO. 1-STR Black Wrinkle PR-1224W 52525 PNR-1224W 50107 Black Wrinkle, Chrome on Turret CPR-1224W 64601 CPNR-1224W 50108 Black Smooth PR-1224S 52515 PNR-1224S 52531 Black Smooth, Chrome on Turret CPR-1224S 52516 SIZE APPROX. WIDTH X THICKNESS GRADUATION FINISH MODEL NO. PART# 1-STR Inch Blades 4” 5/8” x 1/16” No. 4R - 8ths, 16ths, Quick Reading 32nds, 64ths Regular B4-4R 50076 Satin Chrome CB4-4R 50077 No. 16R - Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Satin Chrome CB4-16R 50078 6” 3/4” x 5/64” No. 4R - 8ths, 16ths, Quick Reading 32nds, 64ths Regular B6-4R 50079 Satin Chrome CB6-4R 50080 No. 16R - Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Regular B6-16R 50081 Satin Chrome CB6-16R 50082 12” 1” x 3/32” No. 4R - 8ths, 16ths, Quick Reading 32nds, 64ths Satin Chrome CB12-4R 50084 No. 6R - Aircraft Quick Reading 50ths and 10ths Satin Chrome CB12-6R 50085 No. 16R - Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Regular B12-16R 50086 Satin Chrome CB12-16R 50087 No. 4R - 8ths, 16ths, Quick Reading 32nds, 64ths Stainless Steel BS12-4R 50099 18” 1” x 3/32” No. 4R - 8ths, 16ths, Quick Reading 32nds, 64ths Satin Chrome CB18-4R 50089 No. 16R - Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Regular B18-16R 50090 Satin Chrome CB18-16R 50091 24” 1” x 3/32” No. 4R - 8ths, 16ths, Quick Reading 32nds, 64ths Satin Chrome CB24-4R 50093 No. 6R - Aircraft Quick Reading 50ths and 10ths Satin Chrome CB24-6R 50094 No. 16R - Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Regular B24-16R 50095 Satin Chrome CB24-16R 50096 36” 1” x 3/32” No. 4R - 8ths, 16ths, Quick Reading 32nds, 64ths Satin Chrome CB36-4R 50097 No. 16R - Quick Reading 32nds, 64ths, Aircraft Quick Reading 50ths, 100ths Satin Chrome CB36-16R 50098 Millimeter Blades 150 mm 19 mm x 2 mm mm and 1/2 mm Both Sides Regular B150-35 55985 Satin Chrome CB150-35 55988 300 mm 25 mm x 2.4 mm Regular B300-35 55986 Satin Chrome CB300-35 55989 600 mm Regular B600-35 55987 Satin Chrome CB600-35 55990 Inch and Millimeter Blades 150 mm & 5.3/4” 19 mm x 2 mm 1/2 mm and 32nds One Side; mm and 64ths Reverse Side Regular B150-36 55991 Satin Chrome CB150-36 55992 300 mm & 11.3/4” 25 mm x 2.4 mm Regular B300-36 50101 Satin Chrome CB300-36 55993 600 mm & 23.1/2” Regular B600-36 50102 Satin Chrome CB600-36 55994 CAT NO. PART# 1-STR RANGE SEAT BLADE RULE BLADE RULE 289A 51322 1” 1” 1.9/16” 1.11/16” 289B 51323 1” 1” 2.3/8” 2.3/8” DESCRIPTION CAT. NO. PART# 1-STR Clamp Block with Scriber, Rule and Rod 289C 51324 Used as depth gage (far left) and as scriber. SQUARE HEADS CENTER HEADS FITS BLADE SIZE Cast Iron Black Wrinkle Finish Forged And Hardened Steel With Smooth Black Enamel Finish MODEL 1-STR MODEL 1-STR 4” ---- --- H33-4 50223 6” --- --- H33-6 50224 12” (300 mm) H11-1224 50071 H33-1224 50225 18” 24” (600 mm) FITS BLADE SIZE Cast Iron Black Wrinkle Finish Forged And Hardened Steel With Smooth Black Enamel Finish MODEL 1-STR MODEL 1-STR 4” --- --- C33-4 50226 6” --- --- C33-6 50227 12” (300 mm) C11-1224 50074 C33-1224 50228 18” 24” (600 mm) - 1184 - Bass Tool & Supply, Inc. Houston Email Fax Toll Free www.basstool.com (713) 682-1889 [email protected] (713) 681-4931 800-442-0042
